-
×
UT50B Modern Digital Multimeters
- Vendor:
superworld
Subtotal: ₨6,600
-12%
Phase Detector Meters
TKF-12 Phase Sequence Tester
Availability:
1 in stock
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
₨19,741 ₨22,376
1 in stock
CompareThe TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with he present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 13 × 7 × 4 cm |
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.
Electric security:
- type of insulation: double, according to EN 61010 – 1
- measurement category: CAT III 600 V acc. to EN 61010 – 1
- protection class acc. to EN 60529: IP42
Rated operational conditions:
- rated phase-to-phase voltage range: 120…690 V AC
- maximum operation phase-to-phase voltage: 760 V AC
- frequency range: 10…70 Hz
- operating temperature: -10…+45°C
- storage temperature: -20…+60°C
Other technical data:
- power supply: from the tested electrical installation, up to 15 min for max. voltage
- dimensions: 130 x 70 x 35 mm
- weight (without test leads): approx. 200g
Brand
SONEL
Based on 0 reviews
Be the first to review “TKF-12 Phase Sequence Tester”
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Tool Kits
JM 8173 TOOL KIT
Minimum Order Quantity: 20
Pro tech screwdriver set has 69 pieces of screwdriver bits and auxiliary tools to help you complete your maintenance tasks. This pro tech screwdriver set can be used to repair and disassemble precision digital products and household products. JM-8173 pro tech screwdriver set is simple, bright, and transparent for the broad horizon, which brings you a wonderful DIY trip.
SKU: n/a
Related products
-
Multimeters, Phase Detector Meters
UT261B Phase Sequence and Motor Rotation Indicator
UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.
SKU: n/a -
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000
There are no reviews yet.