9 in stock
Assembly and repairing of household appliances, elevator and other large mechanical, the equipment of broadband and the building construction
₨1,346 ₨1,779
9 in stock
CompareJAKEMY JM- B03 High-end tool bag
Assembly and repairing of household appliances, elevator and other large mechanical, the equipment of broadband and the building construction
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 12 × 15 cm |
Material: 600D oxford
Size:
JM-B03 270*120*150
Technical data
|
Basic function |
Range |
Accuracy |
|
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+5) |
|
ACV |
400mV/4V/40V/400V/750V |
±(1.0%+5) |
|
DCA |
400A/1000A |
±(2.0%+5) |
|
ACA |
400A/1000A |
±(2.0%+5) |
|
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+3) |
|
Capacitance |
4nF/40nF/400nF/4uF/40uF/200uF |
±(3.5%+8) |
|
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
±(0.5%+4) |
|
Temperature |
(-40~ 1000) ℃ / (-40 ~1832) ℉ |
±(1.0%+5) |
|
Special function |
CM-2056 |
|
NCV test |
√ |
|
True RMS test |
√ |
|
Diode test |
√ |
|
Continuity test |
Less than 50Ω±10Ω |
|
Low battery indicator |
Approx. less than 2.4 V |
|
Data hold |
√ |
|
Auto power off |
About 15 minutes |
|
Function protection |
√ |
|
Clamp light |
√ |
|
Backlight display |
√ |
|
Input impedance |
10MΩ |
|
Sampling rate |
3 times/s |
|
AC frequency response |
Current 50-60Hz/ voltage 50-400Hz |
|
Operation method |
Auto or manual range |
|
Max display |
4000 |
|
Clamp opens |
52mm |
|
Battery |
3V (2*AAA battery) |
General Characteristic
|
Meter color |
Orange and Black |
|
Meter weight |
About 280g (including battery) |
|
Meter size |
270×123×50mm |
|
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
| Analog bandwidth | 150MHz | 250MHz | ||
| Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
| Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
| Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
| Memory depth | 70Mpts | |||
| Waveform capture rate | 200,000wfms/s | |||
| Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
| Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
| Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
| Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
| Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
| DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
| Waveform record | 100,000 frames | |||
| Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
| Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
| Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
|
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
| Measurement display | 5 types | |||
| Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
| Frequency counter | 6 bits | |||
| Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
|
Standard Accessories |
USB interface cable | UT-D14 | ||
| Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
| Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
| 16CH Logic analyzer probe | UT-15M | |||
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
Features of UT385 Laser Power Meter
Certificates: CE, RoHS
● Precise laser sensor
● Split design with retractable spring wire
● LCD screen for clear readings
● Data storage function
● Selectable and customizable wavelengths
● Threshold alarm function
● Low power consumption
Features:
1. Small size, light weight, easy to carry.
2. Usage of internal heating element for fast heating and high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron,
for safety and energy saving.
5. Equipped with LED lights, in the case of lacking of light, open the lights, so that soldering is more
desirable and humanized.
6. Apply the SMT double-panel manufacturing technology with neat process and solid joints
7. The handle shell with a new environmentally friendly materials is safe and durable.
UT658 DUAL USB Testers 
TITAN 1502 DS Power Supply 
UT12D-US AC Voltage Detector 
UTP1310 Switching DC Power Supply 
There are no reviews yet.