Out of stock
Model：929D-II
Voltage：220V~240V/AC,50Hz
Maximum power：130W
Rated power：18W
Temperature range：90~480°C/194~896°F
₨7,632 ₨8,555
Out of stock
Compare1. Heat up quickly with high efficiency since this product use the internal heat type of heating element.
2. Plugable type heating element, easy to replace.
3. Adjustable and constant temperature
4. Solder Feed Iron which can operate for soldering by one-hand, convenient and efficient.
5. Simply to replace the solder tin wire.
6. With a power switch, which can be turned off when not in use, safe and energy efficient.
7. The internal use of SMT double-sided manufacturing process, the components installation processes are performed orderly to ensure clarity of electric signal flow.
8. Equipped with sleep function, Celsius/Fahrenheit mode conversion and temperature calibration.
| Weight | 1 kg |
|---|---|
| Dimensions | 15 × 10 × 10 cm |
| Specifications | LM50 |
| Display type | EBTN |
| Display size | 2.0-inches |
| Range | 50m |
| Min. display unit | 0.001m |
| Measurement units | m/ft/in |
| Measurement basis | front/rear |
| Accuracy | ±(2mm+5 x 10-5D) |
| Laser class | 2 |
| Laser type | 630~670nm, ﹤1mW |
| Features | |
| Single measurement | √ |
| Continuous measurement | √ |
| Max/Min/Area | √ |
| Volume | √ |
| Pythagoras | √ |
| Add/Subtract | √ |
| Data storage | 20 groups |
| Auto power off | 3 minutes without operation |
| Auto laser off | 30s without operation |
| Auto backlight off | 10s without operation |
| Audio indication | √ |
| Battery status display | √ |
| Storage temperature | -20℃~70℃ |
| Operating temperature | 0℃~40℃ |
| Specifications | ||
| Model | UTP1306 | |
| Output voltage | 0~32V | |
| Output current | 0~6A | |
| Output power | 192W | |
| Load regulation | CV＜0.1%+5mVCC＜0.2%+3mA | |
| Accuracy(25℃±5℃) | Voltage | ＜0.1%+5mV |
| Current | ＜0.2%+3mA | |
| Ripple and noise | ≤1mVrms | |
| Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
| Display mode | LED voltage and current dual display | |
| Feature | Auto conversion of constant voltage and current with current limit protection | |
| General Characteristics | ||
| Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
| Product color | White and grey | |
| Product net weight | 2.5kg | |
| Product size | 80mm x 150mm x 230mm | |
| Standard accessories | Power cord, output cables | |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
| Description | |
| Certificates | CE, RoHS |
| Transmitter | |
| Port flashing | √ |
| Wire tracking | √ |
| Line alignment | √ |
| Open-short test | 10kΩ |
| Polarity test | √ |
| Operating time | ＞8 hours |
| Receiver | |
| Wire tracking | RJ11＞3000m; RJ45＞100m |
| NCV function | √ |
| Headset jack | 3.5mm |
| Low battery indication | √ |
| Operating time | ＞5 hours |
| GENERAL CHARACTERISTICS | |
| Power | 1050mAh rechargeable lithium battery |
| Product net weight | Transmitter: around 95g; Receiver: around 127g |
| Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
| Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
| Standard individual packing | Gift box, carrying bag |
| Standard quantity per carton | 20pcs |
| Standard carton measurement | 480mm x 370mm x 325mm |
| Standard carton gross weight | About 10kg |
| MODEL | 939BD+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | Red LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Equipped with LED lights, in the case of lacking light, open the lights, so that soldering is more desirable and human.
UT281C True RMS AC 3000A Flexible Clamp Meters 
[NEW] JM-Z21 
MECHANIC Advanced silicone duster B110 
UT 522 Digital Earth Tester 
There are no reviews yet.