YH 947-I Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,450 ₨1,679
Model:947-I
Power supply voltage:110V 60HZ/220V 50HZ
Power : ≤35W/45W/60W
Working temperature :0-40℃
Welding head ground resistance :＜2Ω
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 7 × 7 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 947-I Soldering Iron”
-
Rework & Soldering Station
YH 853D+5A ALL IN ONE REWORK STATION
1. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.
2. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode.
3. The air gun automatically enters standby when the temperature is less than 70oC thresho.
4. With short circuit, open circuit, over-temp and over-load protection.
5. Automatic cooling function for effectively prolonging the heater’s life and protecting the hot air gun.
SKU: n/a -
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test ＜30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Heat Gun
YH 850B HEAT GUN
Operating Voltage :AC 220V±10% 50Hz
Total Power:650W
Operating Environment 0～40℃
relative humidity ＜80％
Storage Temperature-20～80℃
relative humidity ＜80％
Dimensions :255*188*125mm
Weight:2.8KG
performance parameter 850B
Temperature Range :100℃～450℃
display mode —-
air supply mode :Brushless-Motor Fan
Airflow:120L/min(Max)
Temperature stability :±15℃ （static）
Heating Core: Ceramic Framed Heating Core
SKU: n/a
Related products
-
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a
There are no reviews yet.