-
×
UT 61E+ Digital Multimeter
- Vendor:
Subtotal: ₨23,400
-15%
Soldering Irons
YIHUA 947-II SOLDERING IRON
Availability:
20 in stock
Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃（static state)
₨1,378 ₨1,630
20 in stock
Compare1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
| Weight | 0.3 kg |
|---|---|
| Dimensions | 23 × 12 × 3 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 947-II SOLDERING IRON”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Soldering Irons
YH 928D-III Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Red is for 110W, yellow is for 90W and blue is for 65W.
SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Voltage Detector
UT07A-EU Socket Tester
Specifications Model UT07A-EU Operating voltage 230V Operating current ＜18mA Operating frequency 50Hz~60Hz Indications OK, leakage test passed OK Missing earth Missing live Missing neutral Live earth reverse Live earth reverse and missing earth General Characteristics Product color Red and grey Product net weight 79g Product size 65mm x 65mm x 61mm Standard individual packing Blister, English manual Standard quantity per carton 48pcs Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton) Standard carton gross weight 5.8kg SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a
Related products
-
Soldering Irons, Tools and Hardware
YH 928D-II Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Equipped with LED lights, in the case of lacking light, open the lights, so that soldering is more desirable and human.
SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-IV Soldering Iron
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.SKU: n/a
There are no reviews yet.