● Bandwidth: 70MHz, 100MHz
UPO 2104E Ultra Phosphor Oscilloscope
4 in stock
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
₨216,000 ₨276,000
4 in stock
CompareWeight | 3.5 kg |
---|---|
Dimensions | 34 × 16 × 11 cm |
Based on 0 reviews
Be the first to review “UPO 2104E Ultra Phosphor Oscilloscope”
-
Arbitary Waveform Generator
UTG932E Function/Arbitrary Waveform Generator
Specifications Model UTG932E Channel 2 Max frequency 30MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~30MHz Square 1μHz~15MHz Ramp 1μHz~400kHz Pulse 1μHz~15MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characteristics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
Laser Distance Meters
LM 120PRO Laser Distance Meter
Specifications LM120PRO Display type EBTN Display size 2.4-inches Range 120m Min. display unit 0.001m Measurement units m/ft/in/ft+in Measurement basis Front/middle/rear Accuracy ±2mm Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume/Pythagoras √ Add/Subtract/Triangle area √ Auto leveling horizontal/vertical √ Electronic leveler √ Data storage 20 groups Auto laser off 30s without operation Auto power off √ Auto backlight off √ Battery status display √ USB charging √ Tripod mounting hole √ General Characteristics Power 1.2V AAA recharge battery x 3 Product color Red and grey Product net weight 170g Product size 59mm x 28mm x 137mm Standard accessories Carrying bag, USB interface cab Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 390mm x 255mm x 345mm Standard carton gross weight 8.3kg SKU: n/a -
-
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a
There are no reviews yet.