1. Over voltage/current audible alarm
UT 133A Digital Multimeter
20 in stock
Specifications | Range | UT133A |
DC voltage (V) | 600mV/6000mV/60V/600V | ±(0.5%+3) |
AC voltage (V) | 600V | ±(0.7%+3) |
DC current (A) | 600uA/60mA/600mA/10A | ±(1%+3) |
AC current (A) | 10A | ±(1.2%+3) |
Resistance (Ω) | 600Ω/6000Ω/60kΩ/600kΩ/60MΩ | ±(0.8%+2) |
Capacitance (F) | 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF | ±(4%+5) |
Frequency (Hz) | 10.00Hz~1.000MHz | ±(0.1%+5) |
Temperature (℃) | ‒40℃~1000℃ | ±(1%+4) |
Temperature (℉) | ‒40℉~1832℉ | ±(1.5%+5) |
Features | ||
Display count | 6000 | |
Range selection | Auto | |
Diode | √ | |
Continuity buzzer | √ | |
NCV | √ | |
LCD backlight | √ | |
Test probe holder | √ | |
Data hold | √ | |
Low battery indication | √ | |
Overload indication | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 56.8mm x 36.1mm | |
Product color | Red and grey | |
Product net weight | 255g (with batteries) | |
Product size | 155mm x 76.5mm x 49mm | |
Standard accessories | Manual, test leads, K-type thermocouple | |
₨5,760 ₨6,100
20 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 8 × 5 cm |
Based on 0 reviews
Be the first to review “UT 133A Digital Multimeter”
-
Rework & Soldering Station
YH 992D A+ 3 IN 1 REWORK STATION
parameters Rated voltage AC 220V±10% 50Hz power 720W±10%(Max) 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10% Working environment 0~40℃ relative humidity<80% Storage environment -20~80℃ relative humidity<80% Dimensions 255*188*125mm Weight 5.11KG Parts parameters Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 550W 75W Temperature range 100℃~480℃ 200℃~480℃ Air Supply Mode Diaphragm pump — Air Flow 28L/min(MAX) — Temperature Stability ±1℃ (Static) ±1℃ (Static) Display Mode LCD display LCD display Calibration Mode The PID digital program proofreading
The PID digital program proofreading
PID Temperature Calibration Cycle rapidly 20ms high-speed 100ms Heating Core Ceramic columned heating element. Imported heater Standard nozzles/tips (3mm,5mm,8mm,10mm,13mm) 5PCS nozzles
B Tip ground impedance — <2Ω Tip of ground voltage — <2mV SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a
There are no reviews yet.