UT171 series are industrial grade multimeters used by professionals. Its built-in square wave output is useful for troubleshooting industrial control signals. Its LoZ (ACV) feature can be used to identify residual (ghost) voltage in large capacitors. UT171C’s OLED display is perfect for working in low temperatures down to -30°C.
UT171C Industrial True RMS Digital Multimeter
Out of stock
1. AC+DC measurement
₨69,000 ₨71,850
Out of stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 21 × 9 × 5 cm |
Specifications | Range | UT171C |
DC voltage (V) | 1000V | ±(0.025%+5) |
AC voltage (V) | 1000V | ±(0.4%+40) |
DC current (A) | 10A | ±(0.15%+2) |
AC current (A) | 10A | ±(0.75%+5) |
Resistance (Ω) | 60MΩ | ±(0.05%+2) |
Admittance (nS) | 60nS | ±(1%+10) |
Capacitance (F) | 60mF | ±(2.5%+40) |
Frequency (Hz) | 10Hz~10MHz | ±(0.01%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+30) |
Temperature (°F) | -40°F~1832°F | ±(1.5%+50) |
Features | ||
Display count | 60000 | |
Auto/Manual range | √ | |
Bandwidth (Hz) | 100kHz | √ |
4~20mA loop | 0~100% | √ |
LoZ (ACV) | Around 3kΩ | √ |
Diode | Around 3V | √ |
Continuity buzzer | √ | |
Duty cycle | 0.1%~99.9% | √ |
NCV/Data hold/MAX/MIN | √ | |
Relative mode | √ | |
Data storage | 9999 | |
Display type | OLED | |
Analog bar graph | 31 | |
LCD backlight | √ | |
Mis-plug alarm | √ | |
Low battery indication | √ | |
Auto power off | √ | |
Input protection | √ | |
Input impedance for DCV | √ | |
Input impedance for DCV | Around 1GΩ | √ |
General Characteristics | ||
Power | 7.4V 2000mAh Li-ion battery | |
Display | 70.6mm x 35.3mm | |
Product color | Red and grey | |
Product net weight | 384g | |
Product size | 206mm x 95mm x 55mm | |
Standard accessories | Batteries, test leads, point contact temperature probe,USB interface cable, power adaptor, PC software CD | |
Optional accessory | Bluetooth adaptor (UT-D07) |
Based on 0 reviews
Be the first to review “UT171C Industrial True RMS Digital Multimeter”
-
Coating Thickness Gauge
UT343E Coating Thickness Gauge
Features of UT343E Coating Thickness Gauge
Certificates: CE, UKCA
● Bluetooth APP
● Conductive coating measurement (like chromium, zinc, tin)
● Voice broadcast
● Durable probe● Automobile mode
● Multiple measurement modes
● PC software analysisSKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
-
Wire & Cable Testers
UT681HDMI Cable Tester
1. Tests HDMI/MINI-HDMI cables
2. Fastline collocation type: A with A, A with C and C with C
3. Checks circuit breakage, short circuit, cross circuit and the missing wire
4. 20 visible LED indicators
5. Can toggle between scan and full display test modes
6. Single key operation
7. Manual/auto power off (after 10-minute inactivity)
8. Low battery indication
9. CE certification
10. Power supplied by 9V layer-built battery
SKU: n/a
There are no reviews yet.