UT18D Voltage and Continuity Tester
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
₨12,000 ₨13,000
10 in stock
Compare
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
-
Clamp Meters
UT202A+ Digital Clamp Meter
Specifications Range UT202A+ AC current (A) 600A ±(2%+10) AC current frequency (Hz) 50Hz~100Hz ±(1%+5) AC voltage (V) 600V ±(0.8%+5) AC voltage frequency(Hz) 10Hz~10kHz ±(1%+5) DC voltage (A) 600V ±(0.5%+2) Resistance (Ω) 60MΩ ±(0.8%+2) Capacitance (F) 60mF ±(4%+5) Frequency (Hz) 10Hz~10MHz ±(0.1%+4) Features Display count 6000 Auto range √ Jaw opening 28mm True RMS √ NCV √ Live wire test √ Continuity test √ Diode √ MAX/MIN √ Relative mode √ Data hold √ Low battery indication √ Auto power off √ General Characterisitics Power 1.5V battery (R03) x 2 Display 37mm x 25mm Product color Red and grey Product net weight 248g Product size 215mm x 63mm x 36mm Standard individual packing Gift box, Carring bag, English manual Standard quantity per carton 40pcs Standard carton measurement 485mm x 295mm x 385mm Standard carton gross weight 17.3kg SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a
Related products
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Wire & Cable Testers
UT681HDMI Cable Tester
1. Tests HDMI/MINI-HDMI cables
2. Fastline collocation type: A with A, A with C and C with C
3. Checks circuit breakage, short circuit, cross circuit and the missing wire
4. 20 visible LED indicators
5. Can toggle between scan and full display test modes
6. Single key operation
7. Manual/auto power off (after 10-minute inactivity)
8. Low battery indication
9. CE certification
10. Power supplied by 9V layer-built battery
SKU: n/a
There are no reviews yet.