UT262A Non-Contact Phase Detector
10 in stock
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
₨21,600 ₨22,600
10 in stock
CompareUT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 7 × 7 × 3 cm |
| General Functions | Range | Accuracy |
| Type | UT262A | |
| Phase Sequence | 【Positive Phase】indicated by four phasedetecting lights turn on clockwise and non-continuous beeping sound. | √ |
| 【Negative phase】indicated by four phase detecting lights turn on anti-clockwise and continuous beeping sound | √ | |
| Missing Phase Detection | R-S or S-T light Off | √ |
| Live Power Detection | R-S or S-T light On | √ |
| Circuit Break Detection | R-S or S-T light Off | √ |
| Voltage Detection | R-S or S-T light On | √ |
| AC Voltage Range (V) | 70V～600V | √ |
| Frequency Range (Hz) | 40Hz～70Hz | √ |
| Features | ||
| Clamp Open | Φ1.6~Φ16mm | |
| Display Mode | LED | |
| Power On Indication | √ | |
| Buzzer Indication | √ | |
| Auto Power Off | Automatically switch off after three minutes | √ |
| General Characteristics | ||
| Power | 1.5V battery (5#）X 2 | |
| Product Color | Red and Grey | |
| Product Weight | 180g | |
| Product Size | 70mm X 75mm X 30mm | |
| Standard Accessories | Batteries | |
| Standard Individual Packing | Blister, User manual | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT262A Non-Contact Phase Detector”
-
Laser Power Meter
UT385 Laser Power Meter
Features of UT385 Laser Power Meter
Certificates: CE, RoHS
● Precise laser sensor
● Split design with retractable spring wire
● LCD screen for clear readings
● Data storage function● Selectable and customizable wavelengths
● Threshold alarm function
● Low power consumptionSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Analog Multimeters
ANALOG MULTIMETER MF 47A
Features:
1. Multifunctional, can measure ac/dc voltage, dc current, resistance, battery test, capacitance, hfe. 2. Buzzer alarm: when it is below 50, it will wake up the alarm. 3. Battery Test: Large measuring range of 1.2-3.6v. 4. Accurate and Reliable: Clear dial, clear measurement results and high efficiency. 5. Audio Level Meter: Designed to measure amplifier gain and transmission losses with given impedant load and the measurement unit is db.
SKU: n/a
Related products
-
Multimeters, Phase Detector Meters
UT261B Phase Sequence and Motor Rotation Indicator
UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.
SKU: n/a -
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a
There are no reviews yet.