UT312 Vibration Tester
10 in stock
1. Highly accurate and precise
₨85,000 ₨97,000
10 in stock
CompareUT312 Vibration Tester
UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 18 × 7 × 3 cm |
| Specifications | Range | UT312 |
| Acceleration (O-P) | 0.1～199.9m/s² | Frequency response: 10～1500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤2.0m/s², ≤±10%; ＞2.0m/s², ≤±5% | ||
| Velocity (RMS) | 0.1～199.9mm/s | Frequency response: 10～1500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤2.0m/s, ≤±10%; ＞2.0m/s, ≤±5% | ||
| Displacement (P-P) | 1～1999μm | Frequency response: 10～500Hz, Amplitude error: ≤±5% |
| Amplitude linear error: ≤20um, ≤±10%; ＞20um, ≤±5% | ||
| Features | ||
| Data hold | √(auto data hold when releasing the measure key) | |
| Low battery indication | √ | |
| Auto power off | √(auto power off 1 minute after releasing the measure key) | |
| Battery life | Continuous measuring time > 20 hours | |
| Display count | 2000 | |
| General Characterisitics | ||
| Power | 9V battery (6F22 ) | |
| Product color | Red and grey | |
| Product net weight | 230g (including battery) | |
| Product size | 185mm x 68mm x 30mm | |
| Standard accessories | Battery, tool box | |
| Standard individual packing | Gift box, English manual | |
| Standard quantity per carton | 5pcs | |
| Standard carton measurement | 375mm x 307mm x 246mm | |
| Standard carton gross weight | 5.8kg | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT312 Vibration Tester”
-
Clamp Meters
CMP-1006 Digital Clamp-on multimeter
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
SKU: n/a -
Wall Scanner
UT387B Wall Scanner
UT387 series wall scanners are great tools designed for construction and home improvement sector. These scanners can pick up hidden objects behind walls, such as metals, live electrical wires, and wood. UT387A is designed for dry wall, but it can also effectively scan hardwood flooring, plywood, and coated wooden walls. It has two scanning modes, these are used for scanning walls of different thickness.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Digital Multi Meter
UT 892
Features of UT892 2000V AC/DC High Voltage Digital Multimeter
● 6000 counts True RMS
● 2000V AC/DC voltage measurement● VFC 600V voltage measurement● LIVE test● 60MΩ resistance/60mF capacitance● 10kHz frequency measurement● Test lead indication● Backlight● NCV● CAT II 1000V/CAT III 600VSKU: n/a -
Related products
-
-
-
Environment Meters
A25F PM2.5 Meter
1. Precise PM2.5 concentration based on pre-calibrated sensors
2. Temperature measurement (°C/°F)3. Humidity measurement4. Emoticon display5. LCD backlight and red backlight alarm6. Battery status, low power, auto power off7. Formaldehyde concentrationSKU: n/a -
Environment Meters
UT353 – Mini Sound Lever Meter
UT353 is a mini sound meter which can convert ambient sound into electrical signals, process data and displays results on LCD. It does not have traditional meter issues such as meter being too large, complex operation, and so on. UT353 can constantly monitor ambient sound. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring noise levels in hotels, conference halls, home theater, hospitals, and any other noise sensitive environments.
SKU: n/a
There are no reviews yet.