UT320D is a mini-type single-channel K/J thermometer, which ensures a wide range of product temperature measurement in high precision. It can be used with any K/J thermocouple probe.
Environment Meters
UT320D Mini Contact Type Thermometer
Availability:
14 in stock
Main Features
1. 1m drop proof
2. 4 times/s sampling rate
3. Maximum/minimum/average
4. Data hold
5. LCD backlight
6. Wide range, high accuracy
7. K/J thermocouple probe selection
8. CE certification
9. Difference measurement: T1~T2
10. Auto power off
11. Low battery indication
₨4,800 ₨6,000
14 in stock
CompareWeight | 0.1 kg |
---|---|
Dimensions | 12 × 5 × 3 cm |
pecifications | Range | Basic accuracy | ||
UT320D | ||||
Temperature measurement (K) | -50~1300℃ | ±(0.5%+1) | ||
Temperature measurement (J) | -50~1200℃ | ±(0.5%+1) | ||
Features | ||||
Auto power off | √ | |||
Low voltage display | √ | |||
Difference measurement (T1-T2) | √ | |||
Data hold | √ | |||
Unit conversion (℃/℉) | √ | |||
Max/Min/Avg | √ | |||
Function selection (K/J) | √ | |||
Backlight | √ | |||
Working temperature | 0℃~40℃ | |||
Working humidity (relative) | ≤80%RH | |||
1m drop test | √ | |||
General Characteristics | ||||
Power | 3 AAA Zinc-manganese batteries | |||
LCD size | 37.4×36.4mm | |||
Product color | Red and grey | |||
Product net weight | 0.06kg | |||
Product size | 120×53×28mm | |||
Standard accessories | Thermocouple probe, battery | |||
Standard individual packing | Blister, manual |
Based on 0 reviews
Be the first to review “UT320D Mini Contact Type Thermometer”
-
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
1. Trend/event capture
2. Harmonics/inrush current measurement3. File management through USB interface4. Flick measure (PST/PLT values)5. User friendly interface6. Multimeter functions7. Scope functions including waveform display8. 3.5 inches 64K color TFT LCD display9. THD (Total Harmonic Distortion) function10.Long-term monitoringSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Tool Kits, Tools and Hardware
[HOT]JM-8189B
- 8 type 30 pcs of H4*28mm precision repair CR-V screwdriver bits, wide range of applications. Detailed and comprehensive.
- Hanging screwdriver design in the inner box, easy to choose at a glance.
- Whole new box texture, 300°rotating housing provides you with the convenience of maintenance and disassembly.
- Approx. 220.8g light net weight, size 145*115*27mm, lightweight and portable.
SKU: n/a
There are no reviews yet.