UT350 series digital sound level meter with stable performance, safety and reliability can be widely used for environmental protection, laborhygiene, industrial enterprise, scientific research and teaching. It is applied to environmental noise measurement, machinery equipment noise measurement and architectural acoustics measurement.
Environment Meters
UT351 Sound Level Meters
Availability:
10 in stock
UT350 series digital sound level meter with stable performance, safety and reliability can be widely used for environmental protection, laborhygiene, industrial enterprise, scientific research and teaching. It is applied to environmental noise measurement, machinery equipment noise measurement and architectural acoustics measurement.
₨19,800 ₨21,122
10 in stock
CompareWeight | 0.33 kg |
---|---|
Dimensions | 27 × 7 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT351 | |
Range | 30~80dB | ±1.5dB |
50~100dB | ±1.5dB | |
60~110dB | ±1.5dB | |
80~130dB | ±1.5dB | |
Frequency | 31.5Hz~8000Hz | √ |
Frequency Weighting | A&C | √ |
Sample Rate | FAST: 8 Times/s | √ |
SLOW: 1 Times/s | √ | |
Features | ||
Analogue Outputs | AC: 0.707Vrms full scale;Output impedance: around 600Ω | √ |
DC: 2Vrms full scale; 10mV/dB; Output impedance: around 100Ω | √ | |
Data Hold | √ | |
Auto Power Off | √ | |
Low Battery Indication | ≤4.8V | √ |
MAX Mode | √ | |
MIN Mode | √ | |
High Alarm | Display “OVER” | √ |
Lower Alarm | Display “UNDER” | √ |
LCD Backlight | √ | |
Analogue Bar Graph | 30~130dB | √ |
General Characteristic | ||
Power | 1.5V Batteries (LR6) X 4 | |
LCD Size | 53mm X 41 mm | |
Product Color | Red and Grey | |
Product Net Weight | 330g | |
Product Size | 273mm X 70mm X 39 mm | |
Standard Accessories | Batteries, Windscreen, Leather Box | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 30pcs | |
Standard Carton Measurement | 670mm X 385mm X 300mm (0.077 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 18kg |
Based on 0 reviews
Be the first to review “UT351 Sound Level Meters”
-
Insulation Tester
MIC-2501,2500V Insulation Resistance Meter
Electrical safety:
- type of insulation: double, in acc. with EN 61010-1 und IEC 61557
- measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
- case protection rating in acc. with EN 60529: IP65
Other technical specifications:
- power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
- weight of the meter: approx. 0,9 kg
- dimensions: 200 x 180 x 77 mm
- display: LCD segment display
- measurement results memory: 990 cells, 11880 records,
- transmission of measurement results: USB
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a
There are no reviews yet.