UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
Laser Distance Meters
UT395A Professional Laser Distance Meter
Availability:
9 in stock
UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
₨7,680 ₨8,664
9 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 13 × 6 × 5 cm |
Function | Remark |
Range | 0.05-50m |
Min Unit | 1mm |
Accuracy** | ±(2.0mm+d*5/100000) |
Max Laser Power | <1mW |
Laser Wave Length | 635nm |
Max/Min/Continuous | √ |
Area/Volume | √ |
Triangle Pythagorean | √ |
Triangle Height/ Angle | √ |
Triangle Area | √ |
Dip Angle Range | -90.0°~90.0° |
Delay Measurement | √ |
Staking-out | √ |
Storage Quantity | 100pcs |
Universal Electron Level Ruler | √ |
Auto Power off | 100s-300s (adjustable) |
Auto Laser off | 20s-120s (adjustable) |
USB Connector | √ |
Storage Temperature | -20℃~60℃ |
Operating Temperature | 0℃~40℃ |
Storage Humidity | 85%RH |
Dimension | 126*56*28mm |
Battery | 1.2V 800mAh AAANI-MH battery *3 |
Based on 0 reviews
Be the first to review “UT395A Professional Laser Distance Meter”
-
Laser Distance Meters
LM 60 T Laser Tapes
Features of LM T Series Laser Tapes
Certificates: CE, UKCA
LM40T:
● One-button operation
● Single measurement
● Rear measurement reference
● Unit conversion
● Dual measurement methods
● Portable and compactLM60T:
● Single measurement
● Dual measurement mode● Portable and compact
● Continuous measurementSKU: n/a -
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Digital Multi Meter
The Sanwa CD800a is a basic, portable, 4000 count digital multimeter
- 4000 counts
- 0.7% Best Accuracy
- Sharp contrast LCD with character 17.5mm high is used
- Solid & protective body cover that can also be used as a tilt stand
- Frequency, capacitance, and duty cycle measurement function
- Continuity test with buzzer
Includes meter, instruction manual and test leads.
SKU: n/a
There are no reviews yet.