-2%

UT55 Standard Digital Multimeters

Availability:

30 in stock


UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.

8,520 8,700

30 in stock

Compare

UT50 series is a manual range digital multimeter. Lrage display,multi purpose use.Ac dc volts,ac dc amperes resistance and buzzer functions.

Category:
Weight 0.4 kg
Dimensions 19 × 9 × 3 cm
Specifications Range Best Accuracy
Model UT55
DC Voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+1)
DC Current (A) 2mA/20mA/200mA/20A ±(0.8%+1)
AC Voltage (V) 2V/20V/200V/750V ±(0.8%+3)
AC Current (A) 20mA/200mA/20A ±(1%+3)
Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(0.8%+1)
Capacitance (F) 2nF/20nF/200nF/2μF/20μF ±(4%+3)
Frequency (Hz) 2kHz/20kHz ±(1.5%+5)
20kHz ±(1.5%+5)
Temperature (°C) -20℃~1000℃ ±(1%+3)
Features
Transistor
Diode
Continuity Buzzer
Sleep Mode
Low Battery Display
Input Impedance for DC Voltage Measurement 10MΩ
Max. Display 1999
General Characteristic 
Power 9V Battery (6F22)
LCD Size 65mm×33mm
Product Colour Red and Grey
Product Net Weight 580g (including holster))
Product Size 190mm×88mm×34mm
Standard Accessories Test Lead, Battery, Holster,Point type temperature probe
.
Optional Accessories* Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2)

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT55 Standard Digital Multimeters”

There are no reviews yet.

  • TDGC 1000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=4
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • MIC-5001, 5000V Insulation Tester

    0 out of 5
    (0)

    Insulation resistance measurement in a compact, light-weight, low-cost design.

    • Measurement to 5 TΩ
    • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
    • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
    • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
    • Continuous display of test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement method
    • Ramp Test Insulation resistance measurement
    • Measurement of breakdown voltage with increments up to 1 kV / s
    • Measurement of alternating and direct voltages from 0 V to 750 V
    • 990 cells of memory (11880 records) to record results
    • Data transfer to PC via USB cable
    • Built-in rechargeable battery pack
    • Meets the requirements of the EN 61557 standard
    • Charge from optional car lighter (12 V) socket accessory
    SKU: n/a
  • UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 4;
    3、Bandwidth 100MHz,;
    4、Memory Depth 28Mpts (Standard);
    5、Waveform Capture Rate up to 50,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UP21O02CSMHZ