UT682 – Wire Tracker
20 in stock
UT682 – Wire Tracker consists of a transmitter and a receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire check, etc. and it produces fast and accurate measurements. UT682 is an ideal tool for personnel to install and maintain network systems with communication lines and integrated wiring circuits.
₨8,400 ₨8,700
20 in stock
CompareUT682 – Wire Tracker consists of a transmitter and a receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire check, etc. and it produces fast and accurate measurements. UT682 is an ideal tool for personnel to install and maintain network systems with communication lines and integrated wiring circuits.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 12 × 5 × 3 cm |
- Signal transmission form: Multi frequency pulse
- Short circuit, open circuit test: √
- Telephone line polarity instructions: √
- Audio signal test range: ≥1000m
- Video line distance: ≥100m
- Low battery indication(Transmitter):
1x TRACKER
1x TRANSMITTER
1x CARRYING BAG
CROCODILE CLIPS
9V BATTERIES
Brand
UNI T
Based on 0 reviews
Be the first to review “UT682 – Wire Tracker”
-
Oscilloscopes
UTD1102C Handheld Digital Storage Oscilloscopes
1、Automatic waveform and status configuration；
2、Storage of waveforms, setups and interfaces; waveforms and setups reproduction
3、Screen copy function；
4、Fine window extension; precise analysis of waveform details and overview；
5、Unique waveform recording, storage and replay function；
6、HD color 5.7 inch LCD panel at 320 x 240 pixel aspect ratio；
7、Multiple waveform mathematics functions (including add, subtract, multiply and divide)；
8、Multimeter function；
9、USB drive system software upgrade.SKU: n/a -
Process Celibrators
UT715 Multifunction Loop Process Calibrator
Features of UT715 Multifunction Loop Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Clamp Meters
CLAMP METER AC MT 87
- ) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm
- 1) 3 1/2 digits LCD with a Max. Reading of 1999
- 2) Diode and Buzzer function
- 3) Low battery indication
- 4) Overload protection
- 5) Data hold for easy reading
- 1) DC voltage: 600V (?1.0%)
- 2) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm2
SKU: n/a
Related products
-
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
There are no reviews yet.