-2%

UT81C Scope Digital Multimeter

Availability:

9 in stock


UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.

Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance

45,000 46,000

9 in stock

Compare

UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.

Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
Category:
Weight 0.5 kg
Dimensions 20 × 10 × 5 cm
Specifications Range UT81C
DMM Specifications
DC voltage (V) 1000V ±(0.8%+8)
AC voltage (V) 750V ±(1%+15)
DC current (A) 10A ±(1%+8)
AC current (A) 10A ±(1.5%+8)
Resistance (Ω) 40MΩ ±(1%+5)
Capacitance (F) 100μF ±(3%+8)
Frequency (Hz) 10Hz~10MHz ±(0.1%+3)
Scope Specifications
Bandwidth 16MHz
Sampling rate 80MS/s
Vertical accuracy ±(5%+1)
Vertical sensitivity 20mV/div~500V/div (1-2-5)
Time-base accuracy ±(0.01%+1)
Time-base range 50ns/div – 5s/div(1-2-5)
Features
Display count 4000
Auto range
Duty cycle 0.1~99.9%
Diode
Auto power off
Continuity buzzer
Display 160 x 160 monochrome
Trigger types Auto run/Normal/Single shot
Memory 10 screens and setups
Contrast and brightness setup
Low battery indication
USB interface
LCD backlight
Input impedance for DCV Around 10MΩ
General Characteristics
Power 1.5V battery (R6) x 4
Display 60mm x 60mm
Product color Red and grey
Product net weight 498g
Product size 200mm x 100mm x 48mm
Standard accessories Batteries, test lead, alligator clip, USB interface cable, PC software CD
Standard individual packing Gift box, English manual
Standard quantity per carton 12pcs
Standard carton measurement 485mm x 450mm x 260mm (0.057CBM per standard carton)
Standard carton gross weight 16.4kg
Optional accessories Scope probe, AC power adaptor

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT81C Scope Digital Multimeter”

There are no reviews yet.

  • MIC-5001, 5000V Insulation Tester

    0 out of 5
    (0)

    Insulation resistance measurement in a compact, light-weight, low-cost design.

    • Measurement to 5 TΩ
    • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
    • Continuous indication of insulation resistance or leakage current
    • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
    • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
    • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
    • Continuous display of test voltage during the measurement
    • Protection against measuring live objects
    • Two and three-lead measurement method
    • Ramp Test Insulation resistance measurement
    • Measurement of breakdown voltage with increments up to 1 kV / s
    • Measurement of alternating and direct voltages from 0 V to 750 V
    • 990 cells of memory (11880 records) to record results
    • Data transfer to PC via USB cable
    • Built-in rechargeable battery pack
    • Meets the requirements of the EN 61557 standard
    • Charge from optional car lighter (12 V) socket accessory
    SKU: n/a
  • High-temperature repair mats V51 450*300mm

    0 out of 5
    (0)

    High-temperature repair mats V51 450*300mm

    SKU: n/a
  • UT120B Pocket Size Type Digital Multimeters

    0 out of 5
    (0)

    Main Features

    1. Auto range

    2. Auto polarity indication

    3. Relative mode

    4. Data hold

    5. Auto power off

    6. Capacitance measurement

    7. Complies with CE (European Union) directives

    SKU: n/a
  • UT300A+ Infrared Thermometer

    0 out of 5
    (0)

    1. Simple one button operation

    2. 10:1 D:S ratio
    3. Data hold
    4. Backlight
    5. Temperature range: -20℃~400℃
    SKU: n/a
  • DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A

    0 out of 5
    (0)

    • Bargraph to display insulation resistance.
    • Displays the value of external AC voltage along with flashing symbol.
    • Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
    • Trac-Lok mode to conserve battery life on insulation and continuity tests.
    • Live circuit warning beeper.
    • Releasing the test button automatically discharges the charges stored in the circuit under test.
    • Backlight function to view the test results in dimly lit areas.
    • 200mA continuity measuring current to IEC 61557.
    • Minimum 1mA current on insulation tests to IEC 61557.

    SKU: n/a