UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeters
UT81C Scope Digital Multimeter
Availability:
9 in stock
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance
₨45,000 ₨46,000
9 in stock
CompareMultimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance.
Weight | 0.5 kg |
---|---|
Dimensions | 20 × 10 × 5 cm |
Specifications | Range | UT81C |
DMM Specifications | ||
DC voltage (V) | 1000V | ±(0.8%+8) |
AC voltage (V) | 750V | ±(1%+15) |
DC current (A) | 10A | ±(1%+8) |
AC current (A) | 10A | ±(1.5%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(3%+8) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Scope Specifications | ||
Bandwidth | 16MHz | |
Sampling rate | 80MS/s | |
Vertical accuracy | ±(5%+1) | |
Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ |
Time-base accuracy | ±(0.01%+1) | |
Time-base range | 50ns/div – 5s/div(1-2-5) | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Duty cycle | 0.1~99.9% | √ |
Diode | √ | |
Auto power off | √ | |
Continuity buzzer | √ | |
Display | 160 x 160 monochrome | √ |
Trigger types | Auto run/Normal/Single shot | √ |
Memory | 10 screens and setups | √ |
Contrast and brightness setup | √ | |
Low battery indication | √ | |
USB interface | √ | |
LCD backlight | √ | |
Input impedance for DCV | Around 10MΩ | √ |
General Characteristics | ||
Power | 1.5V battery (R6) x 4 | |
Display | 60mm x 60mm | |
Product color | Red and grey | |
Product net weight | 498g | |
Product size | 200mm x 100mm x 48mm | |
Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 12pcs | |
Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | |
Standard carton gross weight | 16.4kg | |
Optional accessories | Scope probe, AC power adaptor |
Based on 0 reviews
Be the first to review “UT81C Scope Digital Multimeter”
-
-
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
There are no reviews yet.