Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
UT890D Digital Multimeter
20 in stock
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
₨4,560 ₨5,491
20 in stock
CompareWeight | 0.35 kg |
---|---|
Dimensions | 18 × 9 × 6 cm |
Specifications | Range | Accuracy |
DC current(V) | 600.0mV | ±(0.5%+4) |
6.000V/60.00V/600.0V | ±(0.5%+2) | |
1000V | ±(0.7%+10) | |
AC current(V) | 6.000V/60.00V/600.0V | ±(0.8%+3) |
750V | ±(1.0%+10) | |
AC Current(A) | 6.000mA/60.00mA | ±(1.0%+12) |
600.0mA | ±(2.0%+3) | |
20.00A | ±(3.0%+5) | |
DC Current(A) | 60.00μA/6.000mA/60.00mA | ±(0.8%+8) |
600.0mA | ±(1.2%+5) | |
20.00A | ±(2.0%+5) | |
Resistance(Ω) | 600.0Ω | ±(0.8%+5) |
6.000kΩ/60.00kΩ/600.0kΩ/6.000MΩ | ±(0.8%+3) | |
60.00MΩ | ±(1.0%+25) | |
Capacitance(F) | 9.999nF | ±(5.0%+35) |
99.99nF~999.9μF | ±(2.5%+20) | |
9.999mF | ±(5.0%+10) | |
99.99mF | 10mF≤C≤20mF | |
±(10.0%+5) | ||
Frequency(Hz) | 9.999Hz~9.999MHz | ±(0.1%+5) |
Measurement range: 10Hz~10MHz(Auto Range), ≤100kHz∶100mVrms≤Input amplitude≤30Vrms,>100kHz~1MHz∶200mVrms≤Input amplitude≤30Vrms,>1MHz∶600mVrms≤Input amplitude≤30Vrms | ||
MAX/MIN | √ | |
True RMS | √ | |
Frequency Response | Applies to sine wave and triangular wave, ≥200Hz, other waveforms are for reference | 40Hz~1kHz |
Diode Test | √ | |
hFE | √ | |
Continuity Test | √ | |
REL | √ | |
Data Hold | √ | |
Backlight Adjustment | √ | |
Battery Voltage Indicator | √ | |
Auto Power Off | Around 15 Minutes | √ |
Input Impedance For DCV | ≥10MΩ | √ |
General Characteristics | ||
Use Environment | 18℃~28℃(64℉~82℉) Relative Temperature | |
Battery | 9V Battery(6F22) | |
LCD size | 63mm × 29mm | |
Product Color | Red and Grey | |
Product Net Weight | 300g | |
Product Size | 186mm × 91mm × 39mm | |
Standard Accessories | Test Leads, Battery | |
Standard Individual Packing | Gift Box, Instructions, Warranty Card | |
Standard Quantity Per Carton | 40PC | |
Standard Individual Packing Size | 645mm × 450mm × 340mm | |
Standard Carton Gross Weight | 22.8 Kg |
Based on 0 reviews
Be the first to review “UT890D Digital Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT208B 1000A True RMS Digital Clamp Meters
Features of UT200 Series 1000A True RMS Digital Clamp Meters
Certifications: CE, UKCA, cETLus
● Flashlight button: Short press this button to turn on/off the flashlight
● NCV Multi-Segment Display and audio/visual alarm● True RMS/Auto backlight● NCV/Function retentionSKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement;
- 2、True RMS response for ACV and ACA;
- 3、99.99mF capacitance measurement;
- 4、V.F.C function for measuring signal at variable frequency ;
- 5、Non-contact voltage detection with LED indication;
- 6、Flashlight for working at dark environment.
SKU: n/a -
Tool Kits
Jakemy JM-6107 79 in 1 Screwdriver Set
Main Features:
● Universal screwdriver tool kit
● Highly precise tips in various specifications for different uses
● Non-slip rubber design handle for a secure and comfortable grip, easy to operate
● Great for mobile phone, PDA, PC and other applications, portable caseSKU: n/a -
Tool Kits, Tools and Hardware
JAKEMY JM-8169 Screwdriver Set 48 in 1 Multi-Purpose Magnetic Precision with Smart Back Case
Tool Kits, Tools and HardwareJAKEMY JM-8169 Screwdriver Set 48 in 1 Multi-Purpose Magnetic Precision with Smart Back Case
Multi-use Screwdriver Set – This screwdriver set works for all electronics like laptops, phones, computer, eyeglasses, smartphones, toys, watches, game consoles, camera, radio and most handheld devices
SKU: n/a
There are no reviews yet.