UTD2072CEX-II Digital Storage Oscilloscope

Availability:

5 in stock


1. 2 channels

2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
3. Up to 28Mpts memory depth
4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
10kHz or 100kHz
5. Max 10Mpts waveform record
6. 8-inch TFT LCD, WVGA (800X480)

0

5 in stock

Compare
UTD2000CEX-II series is cost-effective benchtop digital storage oscilloscope with 8-inch screen, 800×480 high resolution display, 1GS/s sampling rate, 20,000wfms/s waveform capture rate, 25kpts memory depth, a variety of trigger types, which is more suitable for general signal measurements.
Applications:
Serial data analysis, jitter analysis, data storage device testing, electric vehicle and electronics equipment design, evaluating frequency response of sound equipment, troubleshooting automotive engines, electronics technician repair and maintenance.
Category:
Weight 3.5 kg
Dimensions 34 × 16 × 11 cm
Specifications
Model UTD2072CEX-II
Bandwidth 70MHz
Channels 2
Sampling rate 1GS/s (single channel), 500MS/s (dual channels)
Rise time ≤5ns
Memory depth 25kpts
Waveform capture rate ≥20,000wfms/s
Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
Time base scale (s/div) 2ns/div~50s/div
Input impedance (1MΩ±2%)//(22pF±3pF)
Storage methods Setup, wave, bitmap
Trigger types Edge, pulse width, slope, video, runt, window
Waveform operations A+B, A-B, A×B, A/B, FFT
Auto measurements Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq,Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR , FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 paramet ers in total
Number of measurements Display 5 measurements at the same time
Measurement statistics Average, Max, Min, standard deviation, number of measurements
Frequency counter 6 bits
Interfaces USB-OTG, Pass/Fail
General Characteristics
Power 100~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories Probe x 2 (1x, 10x switchable), PC software CD, power cord, USB interface cable
Standard individual packing Carton box
Standard quantity per carton 2pcs
Standard carton measurement 450mm x 420mm x 280mm
Standard carton gross weight 8kg

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2072CEX-II Digital Storage Oscilloscope”

There are no reviews yet.

  • YH 948DQ-II

    0 out of 5
    (0)
    SKU: n/a
  • TDGC 1000VA

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-250V
    Maximum Output Current=4
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • UT681HDMI Cable Tester

    0 out of 5
    (0)

    1. Tests HDMI/MINI-HDMI cables

    2. Fastline collocation type: A with A, A with C and C with C

    3. Checks circuit breakage, short circuit, cross circuit and the missing wire

    4. 20 visible LED indicators

    5. Can toggle between scan and full display test modes

    6. Single key operation

    7. Manual/auto power off (after 10-minute inactivity)

    8. Low battery indication

    9. CE certification

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • UTG9005C-II Function/Arbitrary Waveform Generato

    0 out of 5
    (0)

    1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary

    2. Output frequency range: Sine/square, 5MHz
    3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
    4. 4W power output
    5. EBTN LCD screen
    SKU: n/a