UTG2062B Function/Arbitrary Waveform Generator
5 in stock
1. 1μHz full-band resolution
₨162,000 ₨172,354
5 in stock
CompareWeight | 3.2 kg |
---|---|
Dimensions | 26 × 11 × 32 cm |
Specifications | UTG2062B |
Max frequency | 60MHz |
Channels | 2 |
Sampling rate | 320MS/s |
Waveforms | Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic |
Working modes | Output on/off, continuous, modulation, sweep, burst |
Modulations | AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM |
Arbitrary Waveform | |
Length | 8pts~16Mpts |
Vertical resolution | 16 bits (symbol included) |
Frequency Characteristics | |
Sine | 1μHz~60MHz |
Square | 1μHz~25MHz |
Pulse | 1μHz~20MHz |
Ramp | 1μHz~3MHz |
Harmonic | 1μHz~30MHz |
Arbitrary | 1μHz~15MHz |
Noise | 60MHz (-3dB) |
Resolution | 1μHz |
Accuracy | ±0.5ppm 25℃ |
First year aging rate: 1ppm | |
Temperature coefficient: ±0.5ppm/℃ | |
Temperature Coeifficient | <2ppm/℃ |
Interfaces | USB Host, USB Device, 10MHz clock source input/output |
General Characteristics | |
Power | 100V~240V ACrms, 50Hz/60Hz |
Display | 4.3-inch TFT LCD, WVGA (480 x 272) |
Product color | White and grey |
Product net weight | 3.2kg |
Product size | 265mm x 110mm x 320mm |
Standard accessories | BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable, PC software CD |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 380mm x 330mm x 320mm |
Standard carton gross weight | 8.5kg |
Based on 0 reviews
Be the first to review “UTG2062B Function/Arbitrary Waveform Generator”
-
Digital Micro Ohm Meter
UT620A Digital Micro Ohm Meter
Features of UT620A Digital Micro Ohm Meter
● Comparison measurement with upper and lower limits● Wire length measurement (m/ft)● Built-in Lithium battery● 1000-group data storage● Improved measurement method which improves accuracy by counter-balancing contact resistance of leads● Data transmission between USB and PC● Data hold● LCD backlight● Zeroing function, relative mode● IND resistance measurement modeSKU: n/a -
Laser Distance Meters
LM 120A Laser Distance Meters
Features of LM A Series Laser Distance Meters
Certificates: CE, UKCA
● Ergonomic exterior, comfortable handling
● Millimeter accuracy
● 99 groups data storage
● Quick, self calculation with real-time readout
● Physical leveler(Horizontal and vertical)
● Multiple functions: Max/Min/continuous measurement, data storage, etcSKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Earth Ground Resistance Testers
MRU-21 Earth Resistance Meter
Possible measurements:
- earth resistance measurment with 3-pole method,
- measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
- resistance measurement using 2-pole method.
SKU: n/a -
Environment Meters
UT343D Coating Thickness Gauge
UT343D coating thickness gauge can measure coating thickness on ferrous and non-ferrous materials. This device is designed with a unique quick test feature, which allows users to set thickness range and using a 3-color LED and audio alarm to quickly determine if coating being tested falls within the preset range, greatly increasing work efficiency.
UT343 display is auto rotatable. This CE certified device can store up to 500 sets of data for further analysis through the PC analytical software that is included.SKU: n/a
There are no reviews yet.