● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
● Output frequency range: 1μHz-30MHz/60MHz
Specifications | |
Model | UTG962E |
Channel | 2 |
Max frequency | 60MHz |
Sampling rate | 200MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~60MHz |
Square | 1μHz~20MHz |
Ramp | 1μHz~400kHz |
Pulse | 1μHz~20MHz |
Arbitrary | 1μHz~10MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range (AC+DC) | ±5V (50Ω); ±10V (high Z) |
Amplitude resolution | 1mV |
General Characterisitics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | 4.3”TFT LCD (480×272) |
Product color | White and grey |
Product net weight | 0.33kg |
Product size | 172mm x 90mm x 68mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips |
Standard individual packing | Carton box |
Standard quantity per carton | 4pcs |
Standard carton measurement | 435mm x 360mm x 125mm |
Standard carton gross weight | 3.8kg |
₨61,800 ₨67,800
● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
● Output frequency range: 1μHz-30MHz/60MHz
Weight | 0.4 kg |
---|---|
Dimensions | 17 × 9 × 7 cm |
Specifications | Range | UT133A |
DC voltage (V) | 600mV/6000mV/60V/600V | ±(0.5%+3) |
AC voltage (V) | 600V | ±(0.7%+3) |
DC current (A) | 600uA/60mA/600mA/10A | ±(1%+3) |
AC current (A) | 10A | ±(1.2%+3) |
Resistance (Ω) | 600Ω/6000Ω/60kΩ/600kΩ/60MΩ | ±(0.8%+2) |
Capacitance (F) | 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF | ±(4%+5) |
Frequency (Hz) | 10.00Hz~1.000MHz | ±(0.1%+5) |
Temperature (℃) | ‒40℃~1000℃ | ±(1%+4) |
Temperature (℉) | ‒40℉~1832℉ | ±(1.5%+5) |
Features | ||
Display count | 6000 | |
Range selection | Auto | |
Diode | √ | |
Continuity buzzer | √ | |
NCV | √ | |
LCD backlight | √ | |
Test probe holder | √ | |
Data hold | √ | |
Low battery indication | √ | |
Overload indication | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 56.8mm x 36.1mm | |
Product color | Red and grey | |
Product net weight | 255g (with batteries) | |
Product size | 155mm x 76.5mm x 49mm | |
Standard accessories | Manual, test leads, K-type thermocouple | |
Specifications | ||
Model | UTP1306 | |
Output voltage | 0~32V | |
Output current | 0~6A | |
Output power | 192W | |
Load regulation | CV<0.1%+5mVCC<0.2%+3mA | |
Accuracy(25℃±5℃) | Voltage | <0.1%+5mV |
Current | <0.2%+3mA | |
Ripple and noise | ≤1mVrms | |
Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
Display mode | LED voltage and current dual display | |
Feature | Auto conversion of constant voltage and current with current limit protection | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
Product color | White and grey | |
Product net weight | 2.5kg | |
Product size | 80mm x 150mm x 230mm | |
Standard accessories | Power cord, output cables |
Specifications | Range | UT39E+ | |||
Category ratings | CAT II 1000V, CAT III 600V | ||||
DC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.05%+3) | |||
AC voltage (V) | 200mV/2V/20V/200V/1000V | ±(0.5%+10) | |||
DC current (A) | 2000uA/20mA/200mA/2A/20A | ±(0.5%+5) | |||
AC current (A) | 2000uA/20mA/200mA/2A/20A | ±(0.8%+10) | |||
Resistance (Ω) | 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ | ±(0.3%+2) | |||
Capacitance (F) | 2000uF | ±(4%+20) | |||
Frequency (Hz) | 10Hz~2MHz | ±(0.1%+3) | |||
Temperature | -40℃~1000℃ | ±(1%+5) | |||
-40℉~1832℉ | ±(1.5%+5) | ||||
Conductance (nS) | 0.1~100nS | ±(1%+3) | |||
Display count | 20000 | ||||
NCV | √ | ||||
General Characteristics | |||||
Power | 1.5V battery (R03) x 2 | ||||
Display | 56.5mm x 36mm | ||||
Product net weight | 330g | ||||
Product size | 175mm x 83mm x 53mm | ||||
Standard accessories | Test leads, temperature probe, English manual | ||||
. | |||||
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.
There are no reviews yet.