-3%

UTi165A Thermal Imager UNI-T

Availability:

10 in stock


Specifications
Model UTi165A
IR resolution 160×120 pixels
Field of view (FOV) 56°×42°
Thermal sensitivity (NETD) ≤150mk (0.15℃)
Temperature range  -10~400℃
Spatial resolution (IFOV) 11mrad
Frame rate <9Hz
Measurement accuracy ±2℃ or ±2% whichever is greater
Focus Focus free
Display modes Thermal
Display 2.8”LCD
Auto capture of Hi/Lotemperature
Measurement modes
WIFI
PC analysis software
Drop proof 2m
IP rating IP65
General Characteristics
Power Li-ion battery (3.7V 5000mAh)
Product color Red and grey
Product net weight 455g
Product size 236mm x 75.5 mm x 86mm
Standard accessories micro USB cable, micro SD card, Type-C USB cable
Standard individual packing Blister, gift box, English manual
Standard quantity per carton 5pcs
Standard carton measurement 650mm x 355 mm x 180mm
Standard carton gross weight About 5kg

88,800 91,560

10 in stock

Compare

Advantages of thermal imager detection:

1. Intuitive, efficient and convenient, making users directly “see” the temperature variation.
2. Thermal condition of different locations for comprehensive analysis, providing more information for judgment
3. Avoiding judgment errors, reducing labor costs, and discovering poor heat dissipation and hidden trouble points
4. PC software for data analysis and report output
Weight 0.5 kg
Dimensions 20 × 9 × 10 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTi165A Thermal Imager UNI-T”

There are no reviews yet.

  • UT262A Non-Contact Phase Detector

    0 out of 5
    (0)

    UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

    SKU: 22000
  • RF-7050PRo

    0 out of 5
    (0)
    SKU: n/a
  • TDGC 2000VA 300V

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-300V
    Maximum Output Current=8
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • MS6900S Moisture Tester

    0 out of 5
    (0)

    Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
    ● Depth 0~50mm
    ● MAX / MIN
    ● Sampling Rate 240ms
    ● Unit Selection %, WB, TD, ℃, ℉, %RH
    ● Display Backlight
    ● Data Hold
    ● Auto Power Off
    ● Low Battery Display
    ● Materials Moisture Range :
    1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
    2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
    3: (0.9~24.5%) Smoothing Cement, Concrete
    4: (0.0~12.2%) Anhydrite Screed
    5: (0.7~9.2%) Cement Mortar
    6: (0.5~11.1%) Lime Mortar, Plaster
    7: (0.0~17.8%) Brick

    SKU: n/a
  • UTD2072CEX-II Digital Storage Oscilloscope

    0 out of 5
    (0)

    1. 2 channels

    2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate
    3. Up to 28Mpts memory depth
    4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),
    10kHz or 100kHz
    5. Max 10Mpts waveform record
    6. 8-inch TFT LCD, WVGA (800X480)
    SKU: n/a
  • MRU-21 Earth Resistance Meter

    0 out of 5
    (0)

    Possible measurements:

    • earth resistance measurment with 3-pole method,
    • measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
    • resistance measurement using 2-pole method.
    SKU: n/a