1. 40,000 counts, and basic DCV accuracy of 0.025%
2. Can set the interval for auto data recording
3. MAX/MIN/REL measurement mode
4. Peak hold
5. Analogue bar graph
6. Measure AC and DC in the same stall (AC+DC)
7. 4-20mA loop test
8. 45Hz~100kHz frequency response measurement
9. Double backlight
10. Misplug alarm
11. Auto and manual ranges selectable
12. USB interface available
13. Bluetooth connection with a cellphone for data monitoring
14.Power measurement mode
15. Temperature measurement mode, equipped with K-type point contact temperature probe
16. Complies with CE (European Union) and UL (United States) directives
UT71E Intelligent Digital Multimeters
5 in stock
1. 40,000 counts, and basic DCV accuracy of 0.025%
2. Can set the interval for auto data recording
3. MAX/MIN/REL measurement mode
4. Peak hold
5. Analogue bar graph
6. Measure AC and DC in the same stall (AC+DC)
7. 4-20mA loop test
8. 45Hz~100kHz frequency response measurement
9. Double backlight
10. Misplug alarm
11. Auto and manual ranges selectable
12. USB interface available
13. Bluetooth connection with a cellphone for data monitoring
14.Power measurement mode
15. Temperature measurement mode, equipped with K-type point contact temperature probe
16. Complies with CE (European Union) and UL (United States) directives
₨62,400 ₨65,130
5 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 20 × 9 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT71E | |
DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.025%+5) |
AC Voltage (V) | 4V/40V/400V/1000V | ±(0.4%+30) |
DC Current (A) | 400μA/4000μA/40mA/400mA/10A | ± (0.1%+15) |
AC Current (A) | 400μA/4000μA/40mA/400mA/10A | ± (0.7%+15) |
Resistance (Ω) | 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ | ±(0.3%+8) |
Capacitance (F) | 40nF/400nF/4μF/40μF/400μF/4mF/40mF | ±(1%+20) |
Frequency (Hz) | 40Hz-400MHz | ±(0.01%+8) |
Temperature (°C) | -40 °C ~ 1000°C | ±(1%+30) |
Temperature (°F) | -40°F~1832°F | ±(1.5%+50) |
Power (W) | 2500W | ±(2%+5) |
Features | ||
Display Count | 39999 | |
Auto Range | √ | |
True RMS | √ | |
Bandwidth (Hz) | 100KHz | √ |
Duty Cycle | 10% ~ 90% | ±(1%+30) |
Diode | √ | |
Auto Power Off | √ | |
Continuity Buzzer | √ | |
Low Battery Indication | √ | |
Data Hold | √ | |
Relative Mode | √ | |
MAX/MIN | √ | |
Data Logging | 100 | |
USB Interface | √ | |
Double Backlight | √ | |
Analogue Bar Graph | √ | |
Full Icon Display | √ | |
Setup | √ | |
Input Impedance for DCV | DC 400mV: Around 2.5GΩ,All Other Range: 10MΩ | √ |
4 – 20mA Loop | 0~100% | ±(1%+50) |
Fused 10 A | √ | |
Current Measurement Alarm | √ | |
Voltage & Current AC+DC Measurement | √ | |
General Characteristic | ||
Power | 9V Battery(6F22) | |
LCD Size | 73mm X 50 mm | |
Product Color | Red and Grey | |
Product Net Weight | 384g | |
Product Size | 200mm X 93mm X 40 mm | |
Standard Accessories | Battery, Test Lead, Alligator Clip, Test Clip, USB Interface Cable,PC Software CD,Carrying Bag, Point Contact Temperature Probe,Power Adaptor | |
Standard Carton Gross Weight | 22 Kg |
Based on 0 reviews
Be the first to review “UT71E Intelligent Digital Multimeters”
-
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Tool Kits
JM 8175 TOOL KIT
Our JM-8175 smartphone screwdriver set is covered by a double-sided outer box with strong magnet parts that will not be easy to fall off when opening the box.
The smartphone screwdriver has an aluminum alloy handle with a 360-degree rotating cap, magnetic connector, and non-slip texture design, which makes it applies to various maintenance scenarios.SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
DC Power Supplies
YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
SKU: n/a
There are no reviews yet.