-20%

MS6812 Cable Tracker

Availability:

5 in stock


The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

● Sound and Light Instruction
● Cont and Tone LED Light

Applications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

2,631 3,291

5 in stock

Compare

The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

● Sound and Light Instruction
● Cont and Tone LED Light

Applications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

Weight 0.2 kg
Dimensions 15 × 4 × 3 cm
Specifications
Top Generator Ouput
(Square Waveform):
Single(1500Hz)
Dual(1300~1500Hz)
Send Tone Frequency 1.5kHz
Receive Frequency 100Hz~300kHz

● Power Supply :  2x9V 6F22 Batteries
● Receiver Size :  238mmx43mmx26mm/9.4″x1.7″x1.0″
● Emitter Size :  145mmx35mmx25mm/5.7″x1.38″x0.98″
● Receiver Weight :  71g/0.16 lb
● Emitter Weight :  87g/0.2 lb
● Certifiacte :  CE / ETL / RoHS

 

Brand

MASTECH

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MS6812 Cable Tracker”

There are no reviews yet.

  • CMM-40 Industrial Multimeter

    0 out of 5
    (0)

    The most important features of CMM-40 are:

    • autoranging/manual range selection,
    • „DATA HOLD” function, for holding measured values,
    • „REL” function, which allows you to make measurements relative to a stored reference value,
    • „MAX/MIN” function,
    • „PEAK HOLD” function,
    • memory for 2000 measurement resultS,
    • continuity test with acoustic signalling (beeper),
    • „AUTO-OFF” function,
    • display 4¾ digits (40000 max),
    • double molded, waterproof casing.
    SKU: n/a
  • SOLDERING BIT PVC 40 WATT

    0 out of 5
    (0)

    SOLDERING BIT PVC 40 WATTSOLDERING BIT PVC 40 WATT

    SKU: n/a
  • UT658 USB Tester

    0 out of 5
    (0)

    Features

    1. 10 sets of data storage

    2. High/Low output voltage warning

    3. LCD backlight

    4. Light weight, portable

    SKU: n/a
  • YH 929D V ELECTRIC VACUUM DESOLDERING IRON

    0 out of 5
    (0)

    About this item

    • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
    • This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
    • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
    • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
    • Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
    SKU: n/a
  • UT343A Coating Thickness Gauge

    0 out of 5
    (0)

    Features of UT343A Coating Thickness Gauge

    Certificates: CE, UKCA

    ● Data storage: 199 groups
    ● Measurement method: Single/Continuous
    ● Max/Min/Avg
    ● Unit conversion (um/mil)

    ● Rotatable screen
    ● LED/Buzzer alarm
    ● Auto power off

    SKU: n/a