1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
₨6,000 ₨7,013
1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Weight | 1.9 kg |
---|---|
Dimensions | 27 × 14 × 22 cm |
Specifications | UTG2122B |
Max frequency | 120MHz |
Channels | 2 |
Sampling rate | 320MS/s |
Waveforms | Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic |
Working modes | Output on/off, continuous, modulation, sweep, burst |
Modulations | AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM |
Arbitrary Waveform | |
Length | 8pts~16Mpts |
Vertical resolution | 16 bits (symbol included) |
Frequency Characteristics | |
Sine | 1μHz~60MHz |
Square | 1μHz~25MHz |
Pulse | 1μHz~20MHz |
Ramp | 1μHz~3MHz |
Harmonic | 1μHz~30MHz |
Arbitrary | 1μHz~15MHz |
Noise | 60MHz (-3dB) |
Resolution | 1μHz |
Accuracy | ±0.5ppm 25℃ |
First year aging rate: 1ppm | |
Temperature coefficient: ±0.5ppm/℃ | |
Temperature Coeifficient | <2ppm/℃ |
Interfaces | USB Host, USB Device, 10MHz clock source input/output |
General Characteristics | |
Power | 100V~240V ACrms, 50Hz/60Hz |
Display | 4.3-inch TFT LCD, WVGA (480 x 272) |
Product color | White and grey |
Product net weight | 3.2kg |
Product size | 265mm x 110mm x 320mm |
Standard accessories | BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 380mm x 330mm x 320mm |
Standard carton gross weight | 8.5kg |
Specifications | |
Model | UT116A |
Display count | 3000 |
Resistance | 30MΩ |
Capacitance | 30mF |
Diode test | 3V |
LED/stabilivolt | About 21V/1mA |
Continuity Test | <30Ω |
DCV | 36V |
Auto range | √ |
Auto scan identification | √ |
Auto power off | √ |
General Characteristics | |
Power | 1.5V battery (R03) x 2 |
Display | 39mm x 20mm |
Product color | Red and grey |
Product net weight | About 80g |
Product size | 204mm x 33mm x 25mm |
Standard accessories | Battery |
Specifications | LM50 |
Display type | EBTN |
Display size | 2.0-inches |
Range | 50m |
Min. display unit | 0.001m |
Measurement units | m/ft/in |
Measurement basis | front/rear |
Accuracy | ±(2mm+5 x 10-5D) |
Laser class | 2 |
Laser type | 630~670nm, ﹤1mW |
Features | |
Single measurement | √ |
Continuous measurement | √ |
Max/Min/Area | √ |
Volume | √ |
Pythagoras | √ |
Add/Subtract | √ |
Data storage | 20 groups |
Auto power off | 3 minutes without operation |
Auto laser off | 30s without operation |
Auto backlight off | 10s without operation |
Audio indication | √ |
Battery status display | √ |
Storage temperature | -20℃~70℃ |
Operating temperature | 0℃~40℃ |
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.
Specifications | ||
Model | UTP1306 | |
Output voltage | 0~32V | |
Output current | 0~6A | |
Output power | 192W | |
Load regulation | CV<0.1%+5mVCC<0.2%+3mA | |
Accuracy(25℃±5℃) | Voltage | <0.1%+5mV |
Current | <0.2%+3mA | |
Ripple and noise | ≤1mVrms | |
Output regulation resolution Reliability | CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs | |
Display mode | LED voltage and current dual display | |
Feature | Auto conversion of constant voltage and current with current limit protection | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC; 50Hz~60Hz | |
Product color | White and grey | |
Product net weight | 2.5kg | |
Product size | 80mm x 150mm x 230mm | |
Standard accessories | Power cord, output cables |
Specifications | LM571R-I |
Display type | Red |
Laser type | 1V1H |
Expanded Angle | H130°/V150° |
Laser class | Class 2 |
Light source | 10mW |
Laser wavelength | 635nm |
H/V accuracy | ±2mm/10m |
Self-leveling range | 3°±1° |
Self-leveling time | 3s |
Working distance (Line) | 20m; >30m with detector |
Operating time | >12h (All lasers on) |
Tripod mounting hole | √ |
There are no reviews yet.