YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Soldering Irons, Tools and Hardware
YH 947-I Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Rework & Soldering Station
YH 992D A+ 3 IN 1 REWORK STATION
parameters Rated voltage AC 220V±10% 50Hz power 720W±10％（Max） 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10％ Working environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Dimensions 255*188*125mm Weight 5.11KG Parts parameters Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 550W 75W Temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Diaphragm pump — Air Flow 28L/min(MAX) — Temperature Stability ±1℃ （Static） ±1℃ （Static） Display Mode LCD display LCD display Calibration Mode The PID digital program proofreading
The PID digital program proofreading
PID Temperature Calibration Cycle rapidly 20ms high-speed 100ms Heating Core Ceramic columned heating element. Imported heater Standard nozzles/tips (3mm,5mm,8mm,10mm,13mm) 5PCS nozzles
B Tip ground impedance — ＜2Ω Tip of ground voltage — ＜2mV SKU: n/a -
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-IV Soldering Iron
1. Small size, light weight, easy to carry.
2. Using internal heating type heating element, heating up fast, high efficiency.
3. Temperature adjustable.
4. With a power switch, turn off the switch when you are not using the iron, safe and energy saving.
5. Equipped with lights, in the case of lacking of light, open the lights, so that welding is more desirable
and humane.
6. The internal using the SMT double-panel technology manufacturing, the process is neat, and the joint is
reliable
7. The handle shell with a new environmentally friendly materials, it is safe and durable.SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a
There are no reviews yet.