-8%

YH 853D 2A Rework Station All IN 1

Add to Wishlist
Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection

₨20,400 ₨22,111

Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection
Category:
Weight 4 kg
Dimensions 25 × 19 × 14 cm

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

 

 

Iron parts

  

Gun parts

  

DC power supply partsA
 

work Voltage :AC:26V±10% 50HZ

  

work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)

  

work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)
 

Output power:50W±10%

  

Output power:600W±10%

  

Output power:15W/30W
 

Temperature range:200°C-480°C

  

Temperature range:100°C-480°C

  

Output voltage:0-15V
 

Temperature stability:±2°C

  

Temperature stability:±2°C

 Load stability:<0.01±2mv
 

Tip of ground impedance<2ohm

 Gun type:Diaphragm pump

Airflow is focus on it,24L~28L/Min

  

recovery time:<100us
Tip of ground voltage: <2mV Gun heater resistance:90Ω  

Ripple dB<1mvrms (virtual value)
Iron Heater material: Common heater  

Gun heater material:Nickel-alloys

  

Temperature coefficient:<300PPm/°C
Iron handle:Black handle  

Protection starting current:>standard value 10%

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 853D 2A Rework Station All IN 1”

There are no reviews yet.

  • YH 899D REWORK STATION

    YH 899D REWORK STATION

    0 out of 5
    (0)
    Power consumption 700W
    Gun temperature 100-480oC
    Gun type Brushless fan
    Air flow 120L/MIN
    Gun heater material Ferro-alloys
    Gun heater resistance 74Ω
    Soldering iron temperature range 200-480oC
    Soldering iron type Blue type
    Soldering iron cable Silicagel line
    Soldering iron heater material high-quality heater
    Soldering iron heater resistance 15Ω
    Inner box dimension(cm) 29*20*18
    Outer box dimension(cm) 59.5*41*36
    Outer carton box Q’TY 8PCS/CTN
    Prodcut weight 2.75KG/PC
    SKU: n/a
    ₨14,880 ₨19,476
    Add to cart
    Add to Wishlist
    Compare

  • Blower SE 555

    Blower SE 555

    China Brand
    0 out of 5
    (0)

    ● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves  from the uneasy to reach areas of household appliances, electric panel, car interiors, garden etc.
    ● Dual function blower i.e blowing and extracting functions
    ● Powerful 600 W motor
    ● Variable speed control
    ● Ergonomic handle design
    ● Easy-to-change carbon brush
    ● 3-meter power cord for more flexible work

    SKU: n/a
    ₨3,509 ₨4,011
    Add to cart
    Add to Wishlist
    Compare

  • YH 928D-III Soldering Iron

    YH 928D-III Soldering Iron

    0 out of 5
    (0)

    1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.

    2. Application of high precision switching power supply technology, small size, light weight, easy to carry.

    3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.

    4. Application of unique design of high-precision LED display, showing clear and beautiful.

    5. Red is for 110W, yellow is for 90W and blue is for 65W.

    SKU: n/a
    ₨4,306 ₨6,355
    Add to cart
    Add to Wishlist
    Compare

  • UT07A-EU Socket Tester

    UT07A-EU Socket Tester

    0 out of 5
    (0)
    Specifications
    Model UT07A-EU
    Operating voltage 230V
    Operating current ＜18mA
    Operating frequency 50Hz~60Hz
    Indications OK, leakage test passed
    OK
    Missing earth
    Missing live
    Missing neutral
    Live earth reverse
    Live earth reverse and missing earth
    General Characteristics
    Product color Red and grey
    Product net weight 79g
    Product size 65mm x 65mm x 61mm
    Standard individual packing Blister, English manual
    Standard quantity per carton 48pcs
    Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton)
    Standard carton gross weight 5.8kg
    SKU: n/a
    ₨2,200 ₨2,700
    Add to cart
    Add to Wishlist
    Compare

  • YH 939BD+ SOLDERING STATION

    YH 939BD+ SOLDERING STATION

    0 out of 5
    (0)
    MODEL 939BD+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode Red LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨6,148 ₨8,987
    Read more
    Add to Wishlist
    Compare

  • UT 89XE Digital Multimeter

    UT 89XE Digital Multimeter

    0 out of 5
    (0)
    Specifications UT89XE
    Safety ratings CAT II 1000V, CAT III 600V
    DC voltage (V) 200mV/2V/20V/200V/1000V ±(0.05%+5)
    AC voltage (V) 200mV/2V/20V/200V/1000V ±(0.8%+25)
    DC current (A) 2000μA/200mA/20A ±(0.5%+4)
    AC current (A) 2000uA/200mA/20A ±(1.5%+15)
    Resistance (Ω) 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/200MΩ ±(0.4%+5)
    Capacitance (F) 200mF ±(4%+50)
    Conductance (ns) 200nS ±(1.2%+50)
    Frequency (Hz) 60MHz ±(0.1%+3)
    Temperature (℃)  -40℃~1000℃ ±(1%+10)
    Temperature (℉)  -40℉~1832℉ ±(1.5%+10)
    Audible/visual alarm V/A/Cap/Diode √
    MAX/MIN √
    Peak Hold √
    LPF measurement √
    General Characteristics
    Power 1.5V battery (R03) x 4
    Display 61mm x 36mm
    Product net weight 345g
    Product size 189mm x 89mm x 53mm
    Standard accessories Batteries, test lead,  k-type temperature probe, English manual
    Standard individual packing Gift box
    Standard quantity per carton 20pcs
    Standard carton measurement 450mm x 355mm x 340mm
    Standard carton gross weight 12.2kg
    SKU: n/a
    ₨13,200 ₨17,440
    Add to cart
    Add to Wishlist
    Compare

Related products

  • YH 8508D Hot Air Rework Station

    YH 8508D Hot Air Rework Station

    0 out of 5
    (0)
    • 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
    • 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
    • 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
    • 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
    • 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
    • 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
    • 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
    SKU: n/a
    ₨10,800 ₨11,846
    Add to cart
    Add to Wishlist
    Compare

  • YH 852 (BRUSHLESS FAN) Rework Station

    YH 852 (BRUSHLESS FAN) Rework Station

    0 out of 5
    (0)
                    Machine parameter
    Rated voltage AC 220V±10%  50Hz
    Machine power 700W±10％（MAX）
    working environment 0～40℃  relative humidity ＜80％
    Storage temperature －20～80℃  relative humidity ＜80％
    Machine size 25.5*18.8*12.5cm
    weight 3.55KG
    Part of performance parameters Hot air gun Soldering iron
    Working voltage AC 220V±10%  50Hz AC 26V±10%  50Hz
    Output power 650W 60W
    temperature range 100℃～500℃ 200℃～500℃
    Mode of airflow brushless fan —
    airflow 120L/min(max) —
    Temperature stability ±15℃ （static） ±10℃ （static）
    Display two LED (red/green) —
    heater Heating core ceramics heater common heater
    Tips to ground impedance — ＜2Ω
    Tips voltage to ground — ＜2mV
    SKU: n/a
    ₨8,159 ₨8,555
    Read more
    Add to Wishlist
    Compare

  • YH 899D REWORK STATION

    YH 899D REWORK STATION

    0 out of 5
    (0)
    Power consumption 700W
    Gun temperature 100-480oC
    Gun type Brushless fan
    Air flow 120L/MIN
    Gun heater material Ferro-alloys
    Gun heater resistance 74Ω
    Soldering iron temperature range 200-480oC
    Soldering iron type Blue type
    Soldering iron cable Silicagel line
    Soldering iron heater material high-quality heater
    Soldering iron heater resistance 15Ω
    Inner box dimension(cm) 29*20*18
    Outer box dimension(cm) 59.5*41*36
    Outer carton box Q’TY 8PCS/CTN
    Prodcut weight 2.75KG/PC
    SKU: n/a
    ₨14,880 ₨19,476
    Add to cart
    Add to Wishlist
    Compare

  • YIHUA 850 Hot Air Heat Gun Rework Station

    YIHUA 850 Hot Air Heat Gun Rework Station

    0 out of 5
    (0)

    Application

    Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.

    SKU: n/a
    ₨6,317 ₨7,897
    Read more
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447