- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Food Temperature Meter
UT A61 Food Temperature Meter
Specifications A61 Measurement range -40℃~250℃ (-40℉~482℉) Accuracy ±1℃ (-20℃≤T<100℃) ±2℃ (T<-20℃; T≥100℃) ±2℉ (-4℉≤T<212℉) ±4℉ (T<-4℉; T≥212℉) Minimum measuring depth 12mm Sensor NTC Stabilization time 20s Resolution 0.1℃ (0.1℉) Power 3V button cell×1 (CR1632) Battery duration 12h Operating temperature 0℃~40℃ (32℉~104℉) Storage temperature -20℃~60℃ (-4℉~140℉) Operating humidity <RH80% (No condensable) General Characterisitics Power 3V battery (CR1632) Display 26.6mm x 10.6mm Product color White and grey Product net weight 50.8g Product size 190mm x 29.5mm x 15.5mm Standard accessories Battery Standard individual packing Blister, English manual Standard quantity per carton 40pcs Standard carton measurement 520mm x 210mm x 280mm Standard carton gross weight 5kg SKU: n/a -
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-III Soldering Iron
1.Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively
2.SAFE & EFFICIENT: Non-Toxic solder, and we have tested the soldering iron worked under different circumstances, all the testing results have met the certificate test standard and showing that they work flexible with safety ensured, including the authenticity of the brought effect with the materials.
3.WE PROMISE: you can get 1 Year warranty with friendly, and replacement if there are any problems with the products itself. your 100% satisfied is our final goal.
4.Soldering iron overall stability is much higher.
5. Energy-efficient, while rapid heating, cutting temperature recovery performance.
6. Soldering iron is designed with ON/OFF switch control, works at adjustable thermostat temperature from 220°C to 480°C, fitting most universal soldering needs.
7. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
8. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
9. Adopt a common device design, easy to replace devices
10.YIHUA947-III soldering iron handle is 60W,and the iron color green, but the color have 5color for choose gray, blue, black, white, green, if do your OEM brand can not do gray color.11. YIHUA947-III adjustable soldering iron can as per you need ,can have different kits, the current we have 5 different kit, but also can as per you need choose what you want to buy kits.
SKU: n/a -
Tool Kits
JM-6092A 57 in 1 Multi-Functional Screwdriver Hand Tool Set
- The tool box is manufacture from PP plastic, transparent and clear.
- Plastic design, strong resistance to fall, new pressure switch, strong and beautiful.
- The key position uses high quality CR-V material, the whole is durable: the extension pole that is equipp can solve a few narrow areas easily.
- The tool is equipp with strong magnetic anti-slide handle, which accords with the ergonomic appearance
- Double-side ball anti-slip design, with strong magnetic multi-angle lengthening bar, 9 knots are adjustable, make it easier to use .
- 57 Pcs in 1 Electronic bits Screwdriver Tools Kit Repair set
- Model: JM-6092A
- Package weight: 658g/1.45lb
- 32pcs- 6.35mm CR-V bits; v 20pcs- 4mm CR-V precision bits
- lpcs- 120mm PP&TPR plastic precision handle
- 1pcs- 125mm PP&TPR plastic non-slip handle
- 1pcs- 125mm Aluminum extension rod
- lpcs- 60mm Fine steel extension rod
- 1pcs- 130mm multi angle extension rod
SKU: n/a -
Blower
Blower SE 555
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden etc.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible workSKU: n/a
There are no reviews yet.