A 45 watt output soldering iron with temp range of 200°C – 480°C.You can also program the soldering iron to go into a “Sleep Mode” after your desired minutes of non-use (2,5,10 or 20minutes). Hot air gun can also be switched to be used in either a “Manual or Automatic Mode” and the hot air gun also has an “Automatic Cool Off Feature” which means that the hot air gun will go into a “Cool Off Period”. After it has been placed into its holder and has cooled off to a temperature of 100 Degrees Centigrade, it will enter a Standby Mode and the air will keep flowing. When it has cooled down to 100 Degrees Centigrade, the air will stop flowing and then you will know it is safe to turn the unit off.
YH 899D REWORK STATION
Power consumption | 700W |
Gun temperature | 100-480oC |
Gun type | Brushless fan |
Air flow | 120L/MIN |
Gun heater material | Ferro-alloys |
Gun heater resistance | 74Ω |
Soldering iron temperature range | 200-480oC |
Soldering iron type | Blue type |
Soldering iron cable | Silicagel line |
Soldering iron heater material | high-quality heater |
Soldering iron heater resistance | 15Ω |
Inner box dimension(cm) | 29*20*18 |
Outer box dimension(cm) | 59.5*41*36 |
Outer carton box Q’TY | 8PCS/CTN |
Prodcut weight | 2.75KG/PC |
₨14,880 ₨19,476
Weight | 2.7 kg |
---|---|
Dimensions | 29 × 20 × 18 cm |
Based on 0 reviews
Be the first to review “YH 899D REWORK STATION”
-
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Tool Kits
JM 8139 47 in 1 Screwdriver Set Ratchet Hand-Tool
- Brand: JAKEMY
- Model: JM-8139
- Color: Orange
- Material: PP & TPR & CR-V steel
- Case Size: 200x135x57mm / 7.87×5.31×2.24in
- Product Weight: 733g / 25.9oz
- Size of Package: 215x170x60mm / 8.46×6.7×2.36in
- Package Weight: 827g / 29.2oz
Package included:
- 1 x Magnetic Non-Slip Handle (11.5cm)
- 30 x Screwdriver Bits
- 1 x Extension Bar (H4 x 60mm)
- 3 x PH2 to H5.0 Socket with Accessory Box
- 1 x Pentalobe 0.8mm Screwdriver (17.5cm)
- 1 x Cross 1.5mm Screwdriver (17.5cm)
- l x Roller Opening Tool (13cm)
- 1 x Curved Tweezers (11.5cm)
- 1 x Metal Spudger (17.8cm)
- l x Stainless Knife (13 cm)
- 1 x Plastic Opening Tool
- l x Suction Cup
- 1 x Sim Card Pin
- 1 x CR-V Bit
SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0~40℃ relative humidity<80% Storage temperature -20~80℃ relative humidity<80% Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0~15V Output current Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
Visual Fault Locator
UT 691-10 Visual Fault Locator
Specifications Model UT691-10 Laser output power ≥10mW Optical fiber length range 8~10km Wavelength of redight 650±10nm Optical fiber adapter 2.5mm FC general connector Battery type 3.7V 1050mAh polymer lithium battery Battery life >7h Battery status display The battery status will be shown by 4 blue LED (not in flashlight) Green indicator Indicates auto power off state which LED will flash white light for 3 times Laser mode Continuous mode/Pulse mode Charge voltage and current DC 5V, < 1A APO 15min auto power off (manual adjustable) Warning symbol √ Warning √ Key press test >5000 times Drop test 1m General Characteristics Power 1050mAh rechargeable battery Product color Red and grey Product net weight 62g Product size 130mm x 38mm x 27mm Standard individual packing Gift box, English manual Standard quantity per carton 20pcs Standard carton measurement 285mm x 245mm x 155mm Standard carton gross weight About 2.8kg SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a
There are no reviews yet.