Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃(static state)
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
₨1,500 ₨1,974
Model:947-II
Power supply voltage:110V 60HZ/220V 50HZ
Power:≤60W
Temperature range:220-480℃
Temperature stability :±1℃(static state)
Weight | 0.2 kg |
---|---|
Dimensions | 27 × 7 × 7 cm |
MODEL | 938BD+ |
Power consumption | 135W |
Temperature Range | 100°C~480°C/212°F~896°F |
Display type | LCD |
Temperature stability | ±2°C/3.6°F (static) |
Heater voltage | AC 24V ±10% 50Hz |
Sleep Function | 0-99 Minutes |
Temperature Compensation Programmable | -50 °C to +50 °C |
Working Environment | 0~40°C/32°F~104°F |
Storage Environment | -20°C ~ 80°C/-4°F ~ 176°F |
Soldering Iron & Hot Tweezers Cord Material | 100% Silicone (Virtually No Memory) |
Specifications | ||
Model | Description | |
Optical power meter | Wavelength range | 800nm~1700nm |
Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | |
Measurement range | -70~3dBm | |
Uncertainty | ±5% | |
Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | |
Connector | FC/SC/ST | |
Detector type | InGaAs | |
Visual fault locator | Wavelength | 650nm±10nm |
Power | 10mW (measurable optical fiber length: approximately 8~10km) | |
Mode | Continuous/Pulse | |
Connector | FC/SC/ST | |
Flashlight | √ | |
LAN cable sequence test | Line sequence measurement (LED1~8, LED_G) | |
General Characteristics | ||
Power | 1050mAh rechargeable battery | |
Display | 42mm x 33mm | |
Product color | Red and grey | |
Product net weight | 168g | |
Product size | 132mm x 68mm x 31mm | |
Standard accessories | USB cable | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 305mm x 270mm x 130mm | |
Standard carton gross weight | About 2.7kg |
Specifications | |
Model | UTG932E |
Channel | 2 |
Max frequency | 30MHz |
Sampling rate | 200MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~30MHz |
Square | 1μHz~15MHz |
Ramp | 1μHz~400kHz |
Pulse | 1μHz~15MHz |
Arbitrary | 1μHz~10MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range (AC+DC) | ±5V (50Ω); ±10V (high Z) |
Amplitude resolution | 1mV |
General Characteristics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | 4.3”TFT LCD (480×272) |
Product color | White and grey |
Product net weight | 0.33kg |
Product size | 172mm x 90mm x 68mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips |
Standard individual packing | Carton box |
Standard quantity per carton | 4pcs |
Standard carton measurement | 435mm x 360mm x 125mm |
Standard carton gross weight | 3.8kg |
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
There are no reviews yet.