-7%

YIHUA 605D DC Power Supply


YH-605D communication maintenance power supply

605D communication maintenance power supply is a single line output of stabilized high accuracy

DC stabilized power supply. The output voltage and current can be adjusted continuously within

the rated range. Double digital display shows output voltage and current independently. Several

protection functions include current limitation, voltage reduction, short circuit protection, over-

temperature protection, etc.

The design is applied to production line of the plant, maintenance, laboratories and is also

a necessary device for the communication industry.

22,000 23,710

Compare

Principle description of constant voltage/constant current CV/CC

 

The operation mode of constant voltage/constant current can be automatically switched depending

on the comparison result of the load current and limited current value.

  1. a) Constant voltage CV

When the existing current value is smaller than the set output limit current value, the power supply

is working under the constant voltage mode. The CV indicator light on the front panel is on, the output

voltage is controlled and it will be the same as the set value. Current changes with the load.

  1. b) Constant current mode (CC)

When the current value exceeds the limit value of the output current, the equipment will work in the

 CC mode. The CC indicator light on the front panel is on, the output current value is controlled to

the set value. Since the limited output power cannot be overloaded, the output voltage can be lower

 than the set value. When the output current is lower than the set value, the equipment will

automatically change to CC mode.

Category:
Weight 5.9 kg
Dimensions 25 × 13 × 15 cm

Product parameters

Machine parameters
rated voltage AC220V  50Hz
Power of complete machine 380W
Operating environment 0~40℃  relative humidity <80%
Storage Temperature -20~80℃  relative humidity <80%
Dimensions 255*130*150mm
weight 6.1KG
Specifications
output voltage Adjustable continuously within 0~60V
output current Adjustable continuously within 0~5A

(current limitation adjustment when above 0.2A)

output power 300W
Source effect 1mV
load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode air cooling

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 605D DC Power Supply”

There are no reviews yet.

  • UTD2025CL Digital Storage Oscilloscope

    0 out of 5
    (0)

    1. Dual analog channels width range 1mV/div~20V/div;
    2. 7 inches widescreen LCD displays;
    3. Special Print Scree Feature;
    4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
    5. USB drive system software upgrade;
    6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
    7. Automatic measurement of 28 waveform parameters;
    8. Unique waveform recording and replay function;
    9. Multilingual menu displays.

    SKU: n/a
  • CMM-10 Multimeter

    0 out of 5
    (0)
    • Autoranging/manual range selection.
    • DATA HOLD function, for holding measured values.
    • REL function, which allows you to make measurements relative to a stored reference value.
    • Continuity test with acoustic signalling (beeper).
    • AUTO-OFF function.
    • Display 3 7/8 digits (5000 max).
    SKU: n/a
  • UTG1005A Function/Arbitrary Waveform Generator

    0 out of 5
    (0)

    1. Intuitive interface design

    2. Single channel
    3. 125MS/s sampling rate, 14-bit vertical resolution
    4. Integrated analog and digital design
    5. 4.3 inches TFT LCD
    SKU: n/a
  • UT195M Professional Digital Multimeter

    0 out of 5
    (0)

    Features

    1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

    2. Large 6000-count LCD screen

    3. True RMS

    4. ACV 750V 5kHz bandwidth

    5. Flashlight

    6. Auto LCD backlight controlled by light sensor (can be turned off)

    7. LoZ voltage test, for ghost voltage measurement

    8. Motor phase sequence measurement with 2 probes

    9. 20A current measurement (max 30 seconds)

    SKU: n/a