YIHUA 605D DC Power Supply
YH-605D communication maintenance power supply
605D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within
the rated range. Double digital display shows output voltage and current independently. Several
protection functions include current limitation, voltage reduction, short circuit protection, over-
temperature protection, etc.
The design is applied to production line of the plant, maintenance, laboratories and is also
a necessary device for the communication industry.
₨22,000 ₨23,710
Principle description of constant voltage/constant current CV/CC
The operation mode of constant voltage/constant current can be automatically switched depending
on the comparison result of the load current and limited current value.
- a) Constant voltage CV
When the existing current value is smaller than the set output limit current value, the power supply
is working under the constant voltage mode. The CV indicator light on the front panel is on, the output
voltage is controlled and it will be the same as the set value. Current changes with the load.
- b) Constant current mode (CC)
When the current value exceeds the limit value of the output current, the equipment will work in the
CC mode. The CC indicator light on the front panel is on, the output current value is controlled to
the set value. Since the limited output power cannot be overloaded, the output voltage can be lower
than the set value. When the output current is lower than the set value, the equipment will
automatically change to CC mode.
| Weight | 5.9 kg |
|---|---|
| Dimensions | 25 × 13 × 15 cm |
Product parameters
| Machine parameters | |
| rated voltage | AC220V 50Hz |
| Power of complete machine | 380W |
| Operating environment | 0～40℃ relative humidity ＜80％ |
| Storage Temperature | －20～80℃ relative humidity ＜80％ |
| Dimensions | 255*130*150mm |
| weight | 6.1KG |
| Specifications | |
| output voltage | Adjustable continuously within 0～60V |
| output current | Adjustable continuously within 0～5A
(current limitation adjustment when above 0.2A) |
| output power | 300W |
| Source effect | 1mV |
| load effect | ≤0.33% |
| Ripple noise | ≤3mVrms（5Hz ~ 1MHz）/≤3mArms |
| Display accuracy | 0.1V/0.1A/1mA |
| Protection mode | Over-current, short circuit, over-temperature protection |
| Dissipation mode | air cooling |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YIHUA 605D DC Power Supply”
-
Environment Meters
UT362 Anemometer
1. Data hold, LCD backlight
2. ℃/℉ selectable3. Auto power off (cancelable)4. 2044 sets data storage5. Auto record function with 0 .5~255s interval6. Wearproof fan shaft for improved accuracy and reliability7. Wind speed modes: MAX, MIN, Real-time8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMMSKU: n/a -
Laser Distance Meters
LM120C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a -
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a
Related products
-
DC Power Supplies
YH 1502DD DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 15W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 17*21*16.5cm Weight 1.61KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a -
DC Power Supplies
YH 1501T DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Power of complete machine 25W Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a
There are no reviews yet.