-19%

A25D PM2.5 Meter

Availability:

4 in stock


Main features

1. Precise PM2.5 concentration based on pre-calibrated sensors

2. Temperature measurement (℃/℉)

3. Humidity measurement

4. Emoticon display

5. LCD backlight and red backlight alarm

6. battery status, low power, auto power off

17,400 21,471

4 in stock

Compare

Main features

1. Precise PM2.5 concentration based on pre-calibrated sensors

2. Temperature measurement (℃/℉)

3. Humidity measurement

4. Emoticon display

5. LCD backlight and red backlight alarm

6. battery status, low power, auto power off

Category:
Weight 0.2 kg
Dimensions 7 × 5 × 13 cm
Specifications Range Accuracy
A25D
PM2.5 (ug/m3) 0~100 ±(10ug/m3+10dgts)
101~400 ±(10%+30dgts)
401~500 ±(10%+50dgts)
Temperature℃ -10~50℃ ±1℃
Temperature℉ 14~122℉ ±1.8℉
Humidity 5%~99%RH ±5%RH@30%~80%RH
±8%RH@<30%RH, >80%RH
Features
Auto power off
Low battery indication
Red backlight alarm
LCD backlight
Concentration emoticon
General Characteristics
Power 1500mAh rechargable polymer battery
LCD size 3 inches
Product color White and grey
Product net weight 250g
Product size 30mm×20mm×50mm
Standard accessories 1.5m mini USB interface cable

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “A25D PM2.5 Meter”

There are no reviews yet.

  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • YIHUA 852D+SE (Diaphragm pump) Solder Station

    0 out of 5
    (0)
    Input voltage:110V/220V/230V/240V Product weight:4.5kg
    Size:33*27*20.2cm
    SKU: n/a
  • Digital Storage Oscilloscope UTD2202CM

    0 out of 5
    (0)

    Specifications and features:

    1. 2 channels,1GS/s sample rate

    2. 200MHzbandwidth, 16Mpts maximum memory depth

    3. Waveformacquisition rate is up to 150,000wfms/s

    4. Verticalsensitivity: 2mV/div~5V/div

    5. Time-basedrange: 2ns/div~50s/div

    6. Trigger modes:edge, pluse, runt, video, slope, alternate

    7. Customized AUTO,fast captures the signals

    9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

    10. 34 kinds ofauto measurements

    11. Optional LAmodule

    12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

    13. 7-inch TFT LCD,WVGA (800*480)

    SKU: n/a
  • CLAMP METER AC DT3266

    0 out of 5
    (0)

    DT3266L AC/DC Mini Pocket Handheld Digital Clamp Meter Voltage Current Resistance Tester Multimeter

    Features :

    • 3 1/2 digit LCD screen, the maximum display value is 1999.
    • A multi-purpose clamp meter can measure AC/DC voltage and resistance, etc.
    • Low voltage indication and overload protection.
    • Diode and continuity measurement.
    • High resolution of 1mA minimum force.
    • Small and portable to carry and use.
    • Data retention for easier reading.

    Specifications :

    1. Color : Black + Yellow
    2. Material : Plastic
    3. DC Voltage : 600V ±(0.8%+3dgt)
    4. AC Voltage : 750V ±(1.2% +5dgt)
    5. AC Current : 20A-200A-400A ±(2%+5dgt)
    6. Resistance : 2K-200K-2MΩ ±(1.0%+3dgt)
    7. Power Supply : 2 x AAA 1.5V Batteries (Not included)
    8.  Maximum Display : 1999
    9. Jaw Diameter : 30.8mm
    10. Display Size : 35 x 17mm
    11. Item Size : 17.3 x 5.2 x 2.5cm / 6.8 x 2 x 0.98in
    12. Item Weight : 120g / 4.24oz
    13. Package Size : 17.8 x 10 x 3cm / 7 x 3.94 x 1.18in (L x W x H)
    14. Package Weight : 187g / 6.59in
    15. GW:0.2KG

    Note :  

    This meter can’t measure DC current.

    Package includes :

    • 1 x Clamp Meter
    • 1 x Test Lead

    Best online shopping website for Portable Handheld Digital Clamp Meter DT3266L AC DC Multimeter Voltage Current Resistance Tester at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan

     

    SKU: n/a
  • UT81C Scope Digital Multimeter

    0 out of 5
    (0)

    UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.

    Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance
    SKU: n/a