-8%

ANALOG METER DE 360


Features Of Analog Multimeter DE360TRN:

  • Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.
  • 20kOhm/V DC sensitivity.
  • Mirrored scale.
  • With fuse overload protection circuitry incorporated.
  • Easy to read, colour-coded analogue displays.
  • Manual range selection.
  • Pocket-sized analogue tester.

1,700 1,853

Compare

Analog Multimeter DE360TRN

Analog Multimeter DE360TRN is easy to read, colour-coded analogue displays. Analog meter DE360TRN, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity and transistor leak current, for DC current. This meter can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter. The acts as an ammeter with low series resistance to measure direct current. For measuring high current, we connect a shunt resistor across the galvanometer so that the current through the galvanometer does not cross its maximum allowed value. Here, a significant portion of the current to be measured bypasses through the shunt. With that shunt resistance, an analogue multimeter can measure even milli-ammeter or ammeter ranges of current.

Category:

Specifications Of Analog Meter DE360TRN Analog Ohmmeter:

  1. DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50V/250/1000 ±3%
  2. ACV: 0 -10/50/250/1000V ±4%
  3. DCA: 0 – 50µA/2.5mA/25mA/250mA ±3%
  4. Resistance: 0 – 2K/20K/200K/2M/20Mohm ±3% *dB: -10 dB – 22 dB
  5. Light: Diode check (including LED)
  6. Continuity: both Buzzer & flash
  7. Transistor leak current Features: All range fused
  8. Compact size
  9. Tilt back-stand
  10. Continuity flash
  11. 0-ohm adjustment

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG METER DE 360”

There are no reviews yet.

  • TDGC 2000VA 300V

    0 out of 5
    (0)

    Input Voltage=220V/230V
    Output Voltage=0-300V
    Maximum Output Current=8
    Copper Wind
    LCD Output Display
    Three Pin Output Socket

    SKU: n/a
  • UT123D

    0 out of 5
    (0)

    ● True RMS
    ● NCV/Live
    ● Low Battery Indication: ≤2.7V
    ● Data Hold
    ● Auto Power Off
    ● Acousto-optic indication: NCV/continuity/battery power

    SKU: n/a
  • UT658 A USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • MIC-15k1 ,15kV Insulation Quality Analyzer

    0 out of 5
    (0)

     

    Features:

    • Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
    • It allows testing the electrical durability of the tested object – breakdown voltage indication.
    • High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
    • The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
    • Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
      • visual method (if power cables are visible along the entire length),
      • reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
    • Compatible with external software.
    SKU: n/a