-
×
YH 950 IRON FOR YH 950
- Vendor:
superworld
Subtotal: ₨6,720
-29%
Battery Testers
Battery Load Tester – BT 100D
Availability:
7 in stock
- 100 Amp Digital Battery Load Tester
- Microprocessor Control–makes for an easy and accurate load test with no need to time yourself
- Bright, LED Digital Display–indicates both voltage and test results
- Unique 3-Step Design–LED polarity check function, battery load test and charging system test readout
- Super-Grip Battery Clamps–heavy-duty and color-coded
- Baked Enamel, Steel Case–ventilated to keep cool
- Rubber Insulated Carrying Handle–for comfort and safety
- Checks both Battery and Charging System
₨5,000 ₨7,000
7 in stock
CompareThe BT-100D 100+ Amp Digital Battery Load Tester is microprocessor controlled. It makes for an easy and accurate load test with no need to time yourself to get accurate results. Bright, LED Digital Display indicates both voltage and test results. A unique 3-Step Design provides LED polarity check function, battery load test and charging system test readout. Automatically Turns Off the Load after 10 seconds and locks the voltage. Super-Grip Battery Clamps are heavy-duty and color-coded. Baked Enamel, Steel Case to keep cool. Rubber Insulated Carrying Handle–for comfort and safety. Checks both Battery and Charging System.
| Weight | 0.7 kg |
|---|---|
| Dimensions | 15 × 8 × 6 cm |
12 Volt Battery Analysis
Press “START TEST” & wait for 10 seconds.
Once automatic test cycle is completed, your test results will be:
1. GREEN LIGHT = OK):
Battery capacity is good. May or may not be fully charged.
Determine state of charge by checking specific gravity (use hydrometer). If gravity is less than full charge, check for possible charging system trouble or electrical drain. Recharge battery to fully charged level.
2. GREEN + YELLOW LIGHT = OK BUT WEAK):
Review the load test result with the comparison chart on the tester cover to see if this battery is “OK” or not. If it is “OK”, go up to 1ST “OK” state. If it is not, go down to 3rd “WEAK” state.
3. YELLOW LIGHT = WEAK):
Battery capacity is unsatisfactory. Battery may be either: (1) defective or (2) partially discharged. To determine which, check specific gravity. If gravity is over 1.225, battery is considered defective. If gravity is under 1.225, recharge battery and re-test. If cell-to-cell gravity varies more than 0.025 (25 points), cell trouble may exist. If charging does not bring gravity to fully charged level, the battery is either sulfated or has lost active material.
4. RED LIGHT = BAD):
Battery may be defective (e.g. a bad cell).
NOTE: If pre-test battery voltage is below 12.3V, tester will not allow and should not perform the load test. Please fully charge battery and retest.
Brand
TITAN
Based on 0 reviews
Be the first to review “Battery Load Tester – BT 100D”
-
Environment Meters
UT383 – Mini Light Meter
UT383 is a mini light meter equipped with photoelectric sensing technology, which can effectively represent light intensity with electrical signals, then processes data and displays the result on LCD. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring light intensity in homes, offices, schools, laboratories, indoor farming, hospitals, and other areas.
SKU: n/a -
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a -
IR Resolution
UNI-T UTi320E High IR Resolution 320×240 Professional Handheld Thermal Imager with PC,WiFi and App Connect Support Data Analysis and Real Time Display
IR ResolutionUNI-T UTi320E High IR Resolution 320×240 Professional Handheld Thermal Imager with PC,WiFi and App Connect Support Data Analysis and Real Time Display
Screen Display 3.5″IPS Temeperature Range -40°~400° IR Resolution(Pixels) 320×240 Visible Camera Resolution 2MP Field of View(FOV) 56°x 42° Spatial Resolution(IFOV) 3mrad Frame Rate 9Hz Thermal Sensitivity(NETD) 65mK Measurement Accuracy ±2° or ±2%
whichever is greaterEmissivity 0.01-0.99 Adjustable Spectral Range 8~14μm Foucs Foucs Free Digital Zoom 2x, 4x Palattes 7(Iron, Rainbow, White Hot, Red Hot, Black Hot, Lava, Rainbow HC) Display Modes Thermal,Visible,Fusion,PIP Mesurement Mode Center Pot,High/Low Temp Pot,ROI Temperature Analysis (Point 5 /Line 1 /Area 6 ) total 6 tools Battery Li-ion battery pack 5200mAh Battery Type Replaceable Battery Life ≥ 4hours Charging Time ≤5Hours Communication interface Type-C IP Rating IP54 Drop Proof 2m Functions Flashlight √ Tripod Hole √ Auto tracking of High/Low Temperature √ Auto Alarm of High/Low Temperature √ Image Capture √ Video Recording × Voice Recording × RIO(Eliminates Interference) √ Isotherm √ PC Real Time Image Transmisstion √ PC Analysis Software √ Wifi Photo Download √ Wifi Real Time Display × Bluetooth × Mobile APP √ GPS × Laser/Distance Measurement × SKU: n/a
Related products
-
Battery Testers
UNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test
Battery TestersUNI-T UT3513 DC Resistance Tester Microohmmeter 4.3 Inch LCD Screen Cable/Coil/Motor Resistance Test
Model UT3513 Resistance range 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ Resolution 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q Test current 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA Testing terminal opencircuit voltage ＜1V/＜1V/＜1V/＜1V/＜5V/＜5V/＜5V/＜5V/＜3V/ Measured parameter DC resistance Basic accuracy Slow: 0. 1%; Medium: 0. 2% Maximum reading 22000 Range mode Auto/Manual/nominal Calibration Short-circuit full range zeroing Sorting function 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL Comparing method Absolute tolerance, percentage tolerance, direct-reading comparison Trigger mode Internal, external Test terminal Four-terminal measurement Button functions Lock 一一 keyboard lock, OK 一一 screenshot System setup Language: Chinese/English, key tone setting Interfaces & protocols Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol Upper computer software V Power AC 100~240V 50/60Hz Display 4.3-inches LCD SKU: n/a -
Battery Testers
Battery Load Tester – BT 100A
-
Sleek Design Silver Metal Body
- Easy To Use
- Convenient portable size and easy-to-read scales
- Tests batteries on or off the car in just 10 seconds
- Determines good/bad status with an extra-large display with zero adjust
- Determines state-of-charge cranking and charging volts
- Works on both 6 Volts and 12 volts batteries
SKU: n/a -
There are no reviews yet.