Features of UT673A Battery Testers
Certifications: CE, UKCA, FCC
● 12V cranking lead acid battery test
₨9,600 ₨11,990
UT673A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE certified testers can rapidly and accurately detect common faults caused by battery. UT675A also includes USB communication and built-in printer for report generation.
| Analog bandwidth | 150MHz | 250MHz | ||
| Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
| Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
| Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
| Memory depth | 70Mpts | |||
| Waveform capture rate | 200,000wfms/s | |||
| Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
| Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
| Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
| Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
| Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
| DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
| Waveform record | 100,000 frames | |||
| Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
| Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
| Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
|
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
| Measurement display | 5 types | |||
| Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
| Frequency counter | 6 bits | |||
| Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
|
Standard Accessories |
USB interface cable | UT-D14 | ||
| Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
| Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
| 16CH Logic analyzer probe | UT-15M | |||
Features:
| Model | UT3513 |
| Resistance range | 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ |
| Resolution | 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q |
| Test current | 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA |
| Testing terminal opencircuit voltage | ＜1V/＜1V/＜1V/＜1V/＜5V/＜5V/＜5V/＜5V/＜3V/ |
| Measured parameter | DC resistance |
| Basic accuracy | Slow: 0. 1%; Medium: 0. 2% |
| Maximum reading | 22000 |
| Range mode | Auto/Manual/nominal |
| Calibration | Short-circuit full range zeroing |
| Sorting function | 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL |
| Comparing method | Absolute tolerance, percentage tolerance, direct-reading comparison |
| Trigger mode | Internal, external |
| Test terminal | Four-terminal measurement |
| Button functions | Lock 一一 keyboard lock, OK 一一 screenshot |
| System setup | Language: Chinese/English, key tone setting |
| Interfaces & protocols | Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol |
| Upper computer software | V |
| Power | AC 100~240V 50/60Hz |
| Display | 4.3-inches LCD |
Sleek Design Silver Metal Body
Features of UT675A Battery Testers
Certifications: CE, UKCA, FCC
● 12V cranking lead acid battery test
YH 907L IRON 
SOLDERING BIT PVC 40 WATT 
JM 999 SCREW DRIVER SET 
MECHANIC halogen-free flux paste UV11 [10CC] 
LM570LD-I Laser Level (Discontinued) 
There are no reviews yet.