-24%

CLAMP METER AC CM 2007


Specification of the item

3,335 4,360

Compare

HTC CM-2007 600A AC Clamp Meter with Temp Frequence

  • Digital Clamp meter DC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/ 10mV/100mV/1V; Accuracy: � 1.0% + 5 digits/ � 0.5% + 5 digits
  • AC Voltage: 400mV/4V/40V/400V/600V; Resolution: 0.1mV/1mV/10mV/100mV/1V; Accuracy: �1.5% + 5 digits/ � 1.0% + 5 digits
  • AC Current: 400A to 600A; Resolution: 100mA to 1A; Accuracy: <40A �3.0% + 5 digits/ >40A �2.0% + 5 digits
  • Resistance: 400 ohm/4k?/40k?/400k?/4M?/40M?; Resolution: 0.1?/1?/ 10?/ 100M?/1k?/10 k?; Accuracy: � 0.8% + 5 digit/� 0.8% + 3 digits/� 1.2% + 5 digits
  • Capacitance: 4nF/40nF/400nF/4?F//40?F /200?F; Resolution: 1pF/10pF/100pF/1nF/10nF/100nF; Accuracy: � 5.0% + 20 digit/� 3.5% + 00 digit/� 5.0% + 10 digit
  • Frequency Range (Hz): 100Hz to 10mHz; Resolution: 0.01Hz to 1kHz; Accuracy: /� 0.5% + 5 digits/Accessories: CM-2000 Digital Clamp meter, Instruction Manual, Test Lead, Soft Caring Case / Power: AAA 1.5 x 2
Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “CLAMP METER AC CM 2007”

There are no reviews yet.

  • UT262A Non-Contact Phase Detector

    0 out of 5
    (0)

    UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

    SKU: 22000
  • YH R208A PIPE FOR 850B

    0 out of 5
    (0)
    SKU: n/a
  • RF-6555 PRO

    0 out of 5
    (0)
    SKU: n/a
  • UT71E Intelligent Digital Multimeters

    0 out of 5
    (0)

    1. 40,000 counts, and basic DCV accuracy of 0.025%

    2. Can set the interval for auto data recording

    3. MAX/MIN/REL measurement mode

    4. Peak hold

    5. Analogue bar graph

    6. Measure AC and DC in the same stall (AC+DC)

    7. 4-20mA loop test

    8. 45Hz~100kHz frequency response measurement

    9. Double backlight

    10. Misplug alarm

    11. Auto and manual ranges selectable

    12. USB interface available

    13. Bluetooth connection with a cellphone for data monitoring

    14.Power measurement mode

    15. Temperature measurement mode, equipped with K-type point contact temperature probe

    16. Complies with CE (European Union) and UL (United States) directives

    SKU: n/a
  • UT-L20 leads

    0 out of 5
    (0)
    SKU: n/a