CLAMP METER AC DC CM 2056
Technical data
|
Basic function |
Range |
Accuracy |
|
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+5) |
|
ACV |
400mV/4V/40V/400V/750V |
±(1.0%+5) |
|
DCA |
400A/1000A |
±(2.0%+5) |
|
ACA |
400A/1000A |
±(2.0%+5) |
|
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+3) |
|
Capacitance |
4nF/40nF/400nF/4uF/40uF/200uF |
±(3.5%+8) |
|
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
±(0.5%+4) |
|
Temperature |
(-40~ 1000) ℃ / (-40 ~1832) ℉ |
±(1.0%+5) |
|
Special function |
CM-2056 |
|
NCV test |
√ |
|
True RMS test |
√ |
|
Diode test |
√ |
|
Continuity test |
Less than 50Ω±10Ω |
|
Low battery indicator |
Approx. less than 2.4 V |
|
Data hold |
√ |
|
Auto power off |
About 15 minutes |
|
Function protection |
√ |
|
Clamp light |
√ |
|
Backlight display |
√ |
|
Input impedance |
10MΩ |
|
Sampling rate |
3 times/s |
|
AC frequency response |
Current 50-60Hz/ voltage 50-400Hz |
|
Operation method |
Auto or manual range |
|
Max display |
4000 |
|
Clamp opens |
52mm |
|
Battery |
3V (2*AAA battery) |
General Characteristic
|
Meter color |
Orange and Black |
|
Meter weight |
About 280g (including battery) |
|
Meter size |
270×123×50mm |
|
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
₨8,600 ₨9,300
CM-2056 AC/DC Digital Clamp Multimeter Industrial Tester
Feature
1. Clamp opens 52mm;
2. Large LCD display makes reading clear;
3. Full function protection, strong anti-interferential performance;
4. CE standard design, improves the safety of the test;
5. Duty cycle test, REL test, data hold;
6. Clamp light, backlight display
Brand
China Brand
Based on 0 reviews
Be the first to review “CLAMP METER AC DC CM 2056”
-
Tool Kits
JM 8172 TOOL KIT
Small Screwdriver Set For Electronics
Minimum Order Quantity: 20
Our small screwdriver set, Jakemy JM-8172 has 64 bits for all kinds of electronic products.
The hollow storage rack with magnetic can firmly adsorb bits.
Besides, the screwdriver handle with strong magnetic and mute bearing can help your complete maintenance work more easily.SKU: n/a
Related products
-
Clamp Meters
UT256B ACA DCA Fork Clamp Meters
UT256 series is an AC/DC fork meter with high reliability, high security, auto-range, and mini shape. Its appearance adopts creative design so that wires to be tested can be stuck by the jaw directly instead of after the jaw is pressed to open. It can measure AC/DC current provided with true RMS function. Flashlight on the meter is specially designed for smooth measurement under darkness. Full-range overload protection and distinctive appearance design make it be a new-generation practical electrical measuring meter with better performance.
SKU: n/a -
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a
There are no reviews yet.