1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Parameters |
|
Rated voltage | AC220V±10% 50Hz |
Operating environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
Dimensions of the machine body | 27*14*22cm |
Weight | 1.9KG |
Performance parameters | |
Output voltage | Adjustable continuously within 0~15V |
Output current | Adjustable continuously within 0~2A (current limitation adjustment when above 0.2A) |
Output power | 15W |
Source effect | ≤1mV |
Load effect | ≤0.33% |
Ripple noise | ≤3mVrms(5Hz ~ 1MHz)/≤3mArms |
Display accuracy | 0.1V/0.1A/1mA |
Protection mode | Over-current, short circuit, over-temperature protection |
Dissipation mode | Air cooling |
₨6,000 ₨7,013
1. High accuracy and reliability
2. Short circuit protection and automatic recovery function
3.Dual LED displays to show current and voltage. High-performance mobile phone repair equipment that is both affordable and easy to operate.
Weight | 1.9 kg |
---|---|
Dimensions | 27 × 14 × 22 cm |
MODEL | 938BD+ |
Power consumption | 135W |
Temperature Range | 100°C~480°C/212°F~896°F |
Display type | LCD |
Temperature stability | ±2°C/3.6°F (static) |
Heater voltage | AC 24V ±10% 50Hz |
Sleep Function | 0-99 Minutes |
Temperature Compensation Programmable | -50 °C to +50 °C |
Working Environment | 0~40°C/32°F~104°F |
Storage Environment | -20°C ~ 80°C/-4°F ~ 176°F |
Soldering Iron & Hot Tweezers Cord Material | 100% Silicone (Virtually No Memory) |
Specifications | Description | UT693D | |
Optical power meter | Wavelength range | 800nm~1700nm | √ |
Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | ||
Measurement range | UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm | ||
Uncertainty | ±5% | ||
Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | ||
Connector | FC/SC/ST | ||
Detector type | InGaAs | ||
Visual faultlocator | Wavelength | 650nm±10nm | √ |
Power | 10mW (measurable optical fiber length: approximately 8~10km) | ||
Mode | Continuous/Pulse | ||
Connector | FC/SC/ST | ||
Features | |||
Low battery indication | √ | ||
Auto power off | √ | ||
IP rating | IP65 | ||
Drop test | 2m | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 3 | ||
Display | 63mm x 40mm | ||
Product color | Red and grey | ||
Product net weight | 300g | ||
Product size | 189mm x 87mm x 45mm | ||
Standard accessories | Batteries, carrying bag | ||
Standard individual packing | Gift box, English manual | ||
Standard quantity per carton | 10pcs | ||
Standard carton measurement | 295mm x 250mm x 210mm | ||
Standard carton gross weight | 5.66kg |
Specifications | A61 |
Measurement range | -40℃~250℃ (-40℉~482℉) |
Accuracy | ±1℃ (-20℃≤T<100℃) |
±2℃ (T<-20℃; T≥100℃) | |
±2℉ (-4℉≤T<212℉) | |
±4℉ (T<-4℉; T≥212℉) | |
Minimum measuring depth | 12mm |
Sensor | NTC |
Stabilization time | 20s |
Resolution | 0.1℃ (0.1℉) |
Power | 3V button cell×1 (CR1632) |
Battery duration | 12h |
Operating temperature | 0℃~40℃ (32℉~104℉) |
Storage temperature | -20℃~60℃ (-4℉~140℉) |
Operating humidity | <RH80% (No condensable) |
General Characterisitics | |
Power | 3V battery (CR1632) |
Display | 26.6mm x 10.6mm |
Product color | White and grey |
Product net weight | 50.8g |
Product size | 190mm x 29.5mm x 15.5mm |
Standard accessories | Battery |
Standard individual packing | Blister, English manual |
Standard quantity per carton | 40pcs |
Standard carton measurement | 520mm x 210mm x 280mm |
Standard carton gross weight | 5kg |
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
There are no reviews yet.