-6%

UNI T Benchtop Digital Multimeter UT8802E


  1. 20,000 Count EBTN LCD Display
  2. DC Voltage: 200mV/2V/20V/200V/1000V
  3. AC Voltage: 2V/20V/200V/750V
  4. DC Current: 200μA/2mA/20mA/200mA/20A
  5. AC Current: 2mA/20mA/200mA/20A
  6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
  7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
  8. Frequency: 200Hz~10MHz
  9. Duty cycle: 5%~99%
  10. Frequency response: 1 kHz
  11. USB Interface
  12. Data hold
  13. MAX/MIN
  14. Continuity buzzer
  15. Diode/transistor
  16. test
  17. CAT II 600V

46,800 49,800

Compare

UNI T Benchtop Digital Multimeter UT8802E

Features Of UNI-T UT-8802E Multimeter Benchtop:

  • True RMS (UT8803E)
  • Diode/transistor
  • SCR thyristor test (UT8803E)
  • Inductance measurement (UT8803E)
  • USB interface
  • EBTN LCD screen
  • Data hold
  • MAX/MIN
  • Continuity buzzer

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI T Benchtop Digital Multimeter UT8802E”

There are no reviews yet.

  • DC Power Supply UTP3305

    0 out of 5
    (0)

    Features:

    1. Dual channel, two circuits of adjustableoutput voltage 0~32V and one circuit of fixed voltage 5V.

    2. Master-slave tracking, constant voltageand current, Ⅰ, Ⅱ circuit can be used for master-slave tracking and used in parallelor in series.

    3. Forced ventilation, temperature controlcooling system. When the temperature reaches 65℃, the device dissipatesheat automatically.

    4. Display mode: LED digital tube display,can show voltage and current simultaneously.

    5. Low ripple, low noise

    6. High regulation: 0.01%

    7. Output ON/OFF control

    8. Constant voltage and constant currentoperation

    9. Optional European standard outputterminal

    10. Overload protection, reverse polarityprotection

    SKU: n/a
  • UT620 Series Digital Micro Ohm Meters

    0 out of 5
    (0)

    UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.

    SKU: UN62B0TUOM
  • YH 908 I TIP

    0 out of 5
    (0)
    SKU: n/a
  • A25M PM2.5 Air Quality Meter

    0 out of 5
    (0)

    Features & Merits

    1. Convenient to carry with exquisite design;

    2. PM2.5 concentration and ambient temperature display together on screen;

    3. Six emoticons to indicate PM2.5 concentration grade (top quality, good, mild, moderate, severe, poison);

    4. Designed with laser sensor for auto calibration & real-time test;

    5. Can continuously work for 4hrs with rechargeable polymer battery;

    6. Equipped with wall & car mounts for application in various environments;

    7. Test with one key, over-range indication;

    8. °C/°F unit switching

    SKU: n/a
  • UT202BT Smart AC Clamp Meter

    0 out of 5
    (0)

    1. Button-design clamp meter
    2. One-hand operation and easy to use
    3. True RMS / 9999 counts
    4. Jaw opening: 28mm
    5. Bluetooth 5.0
    6. 600V DC voltage measurement
    7. 600V AC voltage measurement
    8. 600A AC current measurement
    9. Inrush current measurement
    10. Dual display: V+HZ and A+HZ
    11. Temperature measurement
    12. Low pass filter measurement
    13. Bright backlight / Flashlight
    14. Non-contact voltage (NCV)
    15. CAT III 600V

    SKU: n/a