-8%

UNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821


Power supply test, adapter/charger test, battery test, lithium battery protection board test, ATE, component test, etc., commonly used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers, adapter charger manufacturers and other companies Production and testing use

72,600 79,000

Compare

UNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821

The UTL8200 series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and generous, stable in operation, supports dual-channel completely independent testing, has a wide power measurement range, voltage and current measurement speeds up to 40kHz, and a test resolution of up to 1mV/1mA, with rich test functions and modes, and standard RS-232C communication interface, flexibly meet various on-site test conditions, and realize seamless connection with automated production lines and automatic test systems (ATS).

 

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL821”

There are no reviews yet.

  • UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR
    Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a
  • CMM-40 Industrial Multimeter

    0 out of 5
    (0)

    The most important features of CMM-40 are:

    • autoranging/manual range selection,
    • „DATA HOLD” function, for holding measured values,
    • „REL” function, which allows you to make measurements relative to a stored reference value,
    • „MAX/MIN” function,
    • „PEAK HOLD” function,
    • memory for 2000 measurement resultS,
    • continuity test with acoustic signalling (beeper),
    • „AUTO-OFF” function,
    • display 4¾ digits (40000 max),
    • double molded, waterproof casing.
    SKU: n/a
  • UT70B Modern Digital Multi-Purpose Meters

    0 out of 5
    (0)

    Portable digital multimeter UNIT UT70B with advanced design. Photoelectric separation guarentees absolutely secure galvanic isolation of multimeter from PC. … DC Voltage: 400mV / 4V / 40V / 400V / 1000V.

    SKU: n/a
  • UT658LOAD USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • UT50A Modern Digital Multimeters

    0 out of 5
    (0)

    UT 50-II SERIES  digital multimeter  UT-50A with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

     

    SKU: n/a