Digital Storage Oscilloscope UTD2202CM

Availability:

5 in stock


Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

0

5 in stock

Compare

Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

Category:
Weight 2.5 kg
Dimensions 32 × 15 × 13 cm
Model UTD2202CM
Channels 2
Bandwidth 200MHz
Sample Rate 1GS/s
Rise Time ≤1.8ns
Memory Depth 16Mpts
Waveform Acquisition Rate ≥150,000wfms/s
Vertical Sensitivity(V/div) 2mV/div~5V/div
Time-based Range(s/div) 2ns/div~50s/div
Storage Setup, Wave, Bitmap, CSV
Trigger
Trigger Frequency 6 bits
Trigger Modes Edge, Pluse, Video, Slope, Alternate
Trigger Level Range Internal Center of the Screen±div
EXT ±1.2V
EXT/5 ±6V
Suppression Range 100ns~1.5s
Edge Trigger
Edge Mode Rising, Falling, Rising and Falling
Pluse Trigger
Trigger Mode Positive pulse width(greater than, less    than or equal to); Negative pulse width(greater than, less than or equal to)
Pluse Width Range 20ns~10s
Video Trigger
Signal Mode and Line/Field Supports standard NTSC, PAL and SECAM    signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM)
Slope Trigger
Trigger Mode Positive slope(greater than, less than    or equal to); Negative slope(greater than, less than or equal to)
Time Setting 20ns~10s
Measurements
Cursor Manual Mode Voltage difference between the cursor(ΔV),Time difference between cursor(ΔT),reciprocal of ΔT(Hz) (1/ΔT)
Tracking Mode Voltage value and time value of wave    point
Auto Measurements Allowed to display cursor in auto    measurement
Auto Measurements Maximum, Minimum, Peak to Peak Value,    Top Value, Amplitude, Period Average, Average, Period Mean Square    Root, Mean Square Root, Acreage, Period Acreage, Overshoot,    Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time,    Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst    Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF
Mathematics Operations Add, Subtract, ,Multiply, Divide and    Reverse Phase
Storage Waveform 10 Groups of Waveforms, 10 Kinds of    Settings
FFT Window Hanning、Hamming、Blackman、Rectangular
Sample Point 1024 points
Lissajous Figures Bandwidth 60MHz/100MHz
Phase Difference ±3 degrees
Others
Interface Standard Accessories: USB Host, USB    Device, Pass/Fail; Optional: LAN, LA
General Characteristics
Power 100~240VACrms,50Hz/60Hz
LCD Size 7 inches TFT LCD       ,WVGA(800×480)
Product Color Ivory and Grey
Product Net Weight 2.9 kg
Product Size  (W×H×D) 332mm×147mm×170mm
Standard Accessories Probes×2(1:1,10:1 switchable), Power Cord,    USB Cable, PC Software CD
Standard Individual Packing Gift Box

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Storage Oscilloscope UTD2202CM”

There are no reviews yet.

  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • UT139S True RMS Digital Multimeter

    0 out of 5
    (0)
    1. True RMS
    2. NCV
    3. Auto/manual ranges selectable
    4. 31-segment analog bar graph
    5. Diode, duty ratio and continuity buzzer
    6. Black EBTN screen
    SKU: n/a
  • UTi165A Thermal Imager UNI-T

    0 out of 5
    (0)
    Specifications
    Model UTi165A
    IR resolution 160×120 pixels
    Field of view (FOV) 56°×42°
    Thermal sensitivity (NETD) ≤150mk (0.15℃)
    Temperature range  -10~400℃
    Spatial resolution (IFOV) 11mrad
    Frame rate <9Hz
    Measurement accuracy ±2℃ or ±2% whichever is greater
    Focus Focus free
    Display modes Thermal
    Display 2.8”LCD
    Auto capture of Hi/Lotemperature
    Measurement modes
    WIFI
    PC analysis software
    Drop proof 2m
    IP rating IP65
    General Characteristics
    Power Li-ion battery (3.7V 5000mAh)
    Product color Red and grey
    Product net weight 455g
    Product size 236mm x 75.5 mm x 86mm
    Standard accessories micro USB cable, micro SD card, Type-C USB cable
    Standard individual packing Blister, gift box, English manual
    Standard quantity per carton 5pcs
    Standard carton measurement 650mm x 355 mm x 180mm
    Standard carton gross weight About 5kg
    SKU: n/a
  • JM-6095 33 in 1 Repair Torx Screw Driver Screwdrivers Kit Set

    0 out of 5
    (0)

    Precision Telecom Maintenance Tools

    SKU: n/a
  • UT395A Professional Laser Distance Meter

    0 out of 5
    (0)

    UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.

    SKU: n/a
  • UNI-T MSO3154E 150MHz Mixed Signal 4 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a