Digital Storage Oscilloscope UTD2202CM

Availability:

5 in stock


Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

0

5 in stock

Compare

Specifications and features:

1. 2 channels,1GS/s sample rate

2. 200MHzbandwidth, 16Mpts maximum memory depth

3. Waveformacquisition rate is up to 150,000wfms/s

4. Verticalsensitivity: 2mV/div~5V/div

5. Time-basedrange: 2ns/div~50s/div

6. Trigger modes:edge, pluse, runt, video, slope, alternate

7. Customized AUTO,fast captures the signals

9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

10. 34 kinds ofauto measurements

11. Optional LAmodule

12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

13. 7-inch TFT LCD,WVGA (800*480)

Category:
Weight 2.5 kg
Dimensions 32 × 15 × 13 cm
Model UTD2202CM
Channels 2
Bandwidth 200MHz
Sample Rate 1GS/s
Rise Time ≤1.8ns
Memory Depth 16Mpts
Waveform Acquisition Rate ≥150,000wfms/s
Vertical Sensitivity(V/div) 2mV/div~5V/div
Time-based Range(s/div) 2ns/div~50s/div
Storage Setup, Wave, Bitmap, CSV
Trigger
Trigger Frequency 6 bits
Trigger Modes Edge, Pluse, Video, Slope, Alternate
Trigger Level Range Internal Center of the Screen±div
EXT ±1.2V
EXT/5 ±6V
Suppression Range 100ns~1.5s
Edge Trigger
Edge Mode Rising, Falling, Rising and Falling
Pluse Trigger
Trigger Mode Positive pulse width(greater than, less    than or equal to); Negative pulse width(greater than, less than or equal to)
Pluse Width Range 20ns~10s
Video Trigger
Signal Mode and Line/Field Supports standard NTSC, PAL and SECAM    signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM)
Slope Trigger
Trigger Mode Positive slope(greater than, less than    or equal to); Negative slope(greater than, less than or equal to)
Time Setting 20ns~10s
Measurements
Cursor Manual Mode Voltage difference between the cursor(ΔV),Time difference between cursor(ΔT),reciprocal of ΔT(Hz) (1/ΔT)
Tracking Mode Voltage value and time value of wave    point
Auto Measurements Allowed to display cursor in auto    measurement
Auto Measurements Maximum, Minimum, Peak to Peak Value,    Top Value, Amplitude, Period Average, Average, Period Mean Square    Root, Mean Square Root, Acreage, Period Acreage, Overshoot,    Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time,    Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst    Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF
Mathematics Operations Add, Subtract, ,Multiply, Divide and    Reverse Phase
Storage Waveform 10 Groups of Waveforms, 10 Kinds of    Settings
FFT Window Hanning、Hamming、Blackman、Rectangular
Sample Point 1024 points
Lissajous Figures Bandwidth 60MHz/100MHz
Phase Difference ±3 degrees
Others
Interface Standard Accessories: USB Host, USB    Device, Pass/Fail; Optional: LAN, LA
General Characteristics
Power 100~240VACrms,50Hz/60Hz
LCD Size 7 inches TFT LCD       ,WVGA(800×480)
Product Color Ivory and Grey
Product Net Weight 2.9 kg
Product Size  (W×H×D) 332mm×147mm×170mm
Standard Accessories Probes×2(1:1,10:1 switchable), Power Cord,    USB Cable, PC Software CD
Standard Individual Packing Gift Box

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Storage Oscilloscope UTD2202CM”

There are no reviews yet.

  • UT195M Professional Digital Multimeter

    0 out of 5
    (0)

    Features

    1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

    2. Large 6000-count LCD screen

    3. True RMS

    4. ACV 750V 5kHz bandwidth

    5. Flashlight

    6. Auto LCD backlight controlled by light sensor (can be turned off)

    7. LoZ voltage test, for ghost voltage measurement

    8. Motor phase sequence measurement with 2 probes

    9. 20A current measurement (max 30 seconds)

    SKU: n/a
  • JM Z06 CUTTING KNIFE

    0 out of 5
    (0)
    SKU: n/a
  • UT203 CLASSIC

    0 out of 5
    (0)
    SKU: n/a
  • UTD1102C Handheld Digital Storage Oscilloscopes

    0 out of 5
    (0)

    1、Automatic waveform and status configuration;
    2、Storage of waveforms, setups and interfaces; waveforms and setups reproduction
    3、Screen copy function;
    4、Fine window extension; precise analysis of waveform details and overview;
    5、Unique waveform recording, storage and replay function;
    6、HD color 5.7 inch LCD panel at 320 x 240 pixel aspect ratio;
    7、Multiple waveform mathematics functions (including add, subtract, multiply and divide);
    8、Multimeter function;
    9、USB drive system software upgrade.

    SKU: n/a
  • UT278A Clamp Earth Ground Testers

    0 out of 5
    (0)

    UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
    .

    SKU: n/a
  • UT 892

    0 out of 5
    (0)

    Features of UT892 2000V AC/DC High Voltage Digital Multimeter

    ● 6000 counts True RMS

    ● 2000V AC/DC voltage measurement
    ● VFC 600V voltage measurement
    ● LIVE test
    ● 60MΩ resistance/60mF capacitance
    ● 10kHz frequency measurement
    ● Test lead indication
    ● Backlight
    ● NCV
    ● CAT II 1000V/CAT III 600V
    SKU: n/a