Digital Storage Oscilloscope UTD2202CM
5 in stock
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
₨0
5 in stock
CompareSpecifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
| Weight | 2.5 kg |
|---|---|
| Dimensions | 32 × 15 × 13 cm |
| Model | UTD2202CM | |
| Channels | 2 | |
| Bandwidth | 200MHz | |
| Sample Rate | 1GS/s | |
| Rise Time | ≤1.8ns | |
| Memory Depth | 16Mpts | |
| Waveform Acquisition Rate | ≥150,000wfms/s | |
| Vertical Sensitivity(V/div) | 2mV/div~5V/div | |
| Time-based Range(s/div) | 2ns/div~50s/div | |
| Storage | Setup, Wave, Bitmap, CSV | |
| Trigger | ||
| Trigger Frequency | 6 bits | |
| Trigger Modes | Edge, Pluse, Video, Slope, Alternate | |
| Trigger Level Range | Internal | Center of the Screen±div |
| EXT | ±1.2V | |
| EXT/5 | ±6V | |
| Suppression Range | 100ns~1.5s | |
| Edge Trigger | ||
| Edge Mode | Rising, Falling, Rising and Falling | |
| Pluse Trigger | ||
| Trigger Mode | Positive pulse width(greater than, less than or equal to); Negative pulse width(greater than, less than or equal to) | |
| Pluse Width Range | 20ns~10s | |
| Video Trigger | ||
| Signal Mode and Line/Field | Supports standard NTSC, PAL and SECAM signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM) | |
| Slope Trigger | ||
| Trigger Mode | Positive slope(greater than, less than or equal to); Negative slope(greater than, less than or equal to) | |
| Time Setting | 20ns~10s | |
| Measurements | ||
| Cursor | Manual Mode | Voltage difference between the cursor（ΔV)，Time difference between cursor（ΔT)，reciprocal of ΔT(Hz) (1/ΔT) |
| Tracking Mode | Voltage value and time value of wave point | |
| Auto Measurements | Allowed to display cursor in auto measurement | |
| Auto Measurements | Maximum, Minimum, Peak to Peak Value, Top Value, Amplitude, Period Average, Average, Period Mean Square Root, Mean Square Root, Acreage, Period Acreage, Overshoot, Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time, Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF | |
| Mathematics Operations | Add, Subtract, ,Multiply, Divide and Reverse Phase | |
| Storage Waveform | 10 Groups of Waveforms, 10 Kinds of Settings | |
| FFT | Window | Hanning、Hamming、Blackman、Rectangular |
| Sample Point | 1024 points | |
| Lissajous Figures | Bandwidth | 60MHz/100MHz |
| Phase Difference | ±3 degrees | |
| Others | ||
| Interface | Standard Accessories: USB Host, USB Device, Pass/Fail; Optional: LAN, LA | |
| General Characteristics | ||
| Power | 100～240VACrms，50Hz/60Hz | |
| LCD Size | 7 inches TFT LCD ,WVGA(800×480) | |
| Product Color | Ivory and Grey | |
| Product Net Weight | 2.9 kg | |
| Product Size (W×H×D) | 332mm×147mm×170mm | |
| Standard Accessories | Probes×2(1:1,10:1 switchable), Power Cord, USB Cable, PC Software CD | |
| Standard Individual Packing | Gift Box | |
Brand
UNI T
Based on 0 reviews
Be the first to review “Digital Storage Oscilloscope UTD2202CM”
-
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Soldering Station
YH 939D+ III EFFICIENT SOLDERING STATION
Manufacturer info:
1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current
machine (eg:temperature, iron sleep time,which is currently on display all function values can
be stored), you can quickly switch between each storage segment.
2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.
3.The use Hakko heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
4. Anti-static design, which can effectively avoid damage to delicate components;
5. It has automatically detects the failure and alarm function
6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.9.The panel is different from traditional,used aluminum alloy material,with new appearance design and improved performance .
10.The silvery knob give the users high-end and specialty sensor.
What’s in the box: main unit + power chord, manual, soldering iron with tip (900M-T type), holder with brass wool tip cleaner.
SKU: n/a -
Environment Meters
UT383 – Mini Light Meter
UT383 is a mini light meter equipped with photoelectric sensing technology, which can effectively represent light intensity with electrical signals, then processes data and displays the result on LCD. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring light intensity in homes, offices, schools, laboratories, indoor farming, hospitals, and other areas.
SKU: n/a -
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3005A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a
Related products
-
Oscilloscopes
UTD1202C Handheld Digital Storage Oscilloscope
Specifications Model UTD1202C Bandwidth 200MHz Channels 2 Sampling rate 1GS/s Rise time ≤1.8ns Memory depth 7.5kpts Vertical sensitivity 5mV/div~50V/div Time base scale 2ns/div-50s/div Storage modes Setup, waveform, bitmap Trigger modes Edge, pulse width, video and alternative Interfaces USB host, USB OTG (UTD1202C Optional) Multimeter Specifications Range Accuracy DC voltage (V) 600mV/6V/60V/600V/1000V ±(1%+5) AC voltage (V)(45Hz~400Hz) 600mV/6V/60V/600V/700V ±(1.2%+5), Frequency: ＜200Hz ±(1.5%+5), Frequency: ≥200Hz DC current (A) 6mA/60mA/600mA ±(1.2%+5) 6A ±(1.5%+5) AC current (A)(45Hz~400Hz) 6mA/60mA/600mA ±(2%+5) 6A ±(2.5%+5) Resistance (Ω) 6kΩ/60kΩ/600kΩ ±(1.2%+5) 600Ω/6MΩ/60MΩ ±(1.5%+5) Capacitance (F) 6nF/6mF ±(5%+10) 60nF/600nF/6μF/60μF/600μF ±(4%+5) Display count 6000 Auto range √ General Characteristics Power Li-ion battery: 7.4V 4400mAh; DC adapter: 100~240V 50/60Hz input, 9V/4A output Display 5.7 inches TFT LCD, QVGA (320×240) Product net weight Red and grey Product color 1.8kg Product size 268mm x 168 mm x 60mm Standard accessories Probe x2 (1x, 10x switchable), current voltage converter, power cord, adapter, test leads Standard individual packing Carton box, carrying bag Standard quantity per carton 4pcs Standard carton measurement 500mm x 400mm x 320mm Standard carton gross weight 16.7kg SKU: n/a -
Oscilloscopes
UTD1050DL Handheld Digital Storage Oscilloscopes
Product Features:
1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
4、 Isolated USB for much safer communication;
5、 White and black display for your option, perfect for use outdoors with strong light;
6、 Intelligent local or network software update；
7、 More than 6 hours of continuous battery operation.SKU: n/a -
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 2/；
3、Bandwidth 100MHz，；
4、Memory Depth 32Mpts(Standard)；
5、Waveform Capture Rate up to 30,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.
SKU: UT21P02CSO -
Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a
There are no reviews yet.