UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
UT275 Clamp Earth Ground Testers
Out of stock
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
₨94,800 ₨96,000
Out of stock
CompareWeight | 1.3 kg |
---|---|
Dimensions | 29 × 9 × 7 cm |
Specifications | Range | Best Accuracy |
Model | UT275 | |
Earth Ground Resistance (Ω) | 0.01~0.099Ω | ±(1%+0.01) |
0.1~0.99Ω | ±(1%+0.01) | |
1.0~49.9Ω | ±(1.5%+0.1) | |
50.0~99.5Ω | ±(2%+0.5) | |
100~199Ω | ±(3%+1) | |
200~395Ω | ±(10%+5) | |
400~590Ω | ±(20%+10) | |
600~1000Ω | ±(25%+20) | |
Leakage Current(A) | 0.00~299mA | ±(2.5%+2mA) |
0.30~2.99A | ±(2.5%+100mA) | |
3.00~30.0A | ±(2.5%+300mA) | |
Features | ||
Display Count | 9999 | |
Auto Range | √ | |
Jaw Capacity | 28mm | |
Auto Power Off | √ | |
Low Battery Indication | ≤5.2V | √ |
Data Hold | √ | |
Data Logging | 30 | |
Data Recall | √ | |
LCD Backlight | √ | |
Auto Calibration | √ | |
Resistance Limit Alarm | √ | |
General Characteristic | ||
Power | 1.5V Alkaline Batteries(LR6)×4 | |
LCD Size | 47mm X 28.5 mm | |
Product Color | Red and Grey | |
Product Net Weight | 1320g | |
Product Size | 293mm X 90mm X66 mm | |
Standard Accessories | Batteries, Test Ring, Tool Box | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 5 PCs | |
Standard Carton Measurement | 495mm X 368mm X 310mm (0.057CBM Per Standard Carton) | |
Standard Carton Gross Weight | 16Kg |
Based on 0 reviews
Be the first to review “UT275 Clamp Earth Ground Testers”
-
Multimeters, Phase Detector Meters
UT261B Phase Sequence and Motor Rotation Indicator
UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.