Fluke 18B+ Digital Multimeter
Out of stock
Feature:
-New Function:Frequency Test
-New Desgin: A Large LCD than FLUKE 18B, with a high brightness LCD Back light
-Two Mode LED Test :
-DMM LED Socket Test Mode .
-UUT(PCBA) LED Test Mode(using test lead).
-Light up LED without considering the polarity.
-Voltage,Resistance,Continuity Testing,Capacitance Test.
-Data Hold,Diode Test.
-Frequency and Duty Cycle.
-MAX Input Current 10A.
₨30,270 ₨32,905
Out of stock
CompareFLUKE 18B+ AC/DC Voltage,Current,Capacitance,Ohm Auto/Manual Range Digital multimeter with LED Test
| Weight | 1 kg |
|---|---|
| Dimensions | 16 × 8 × 9 cm |
Specifications:
| Feature | Range | Resolution | Accuracy |
| AC Voltage(40-500Hz) | 4.000 V
40.00 V 400.0 V 1000 V |
0.001 V
0.01 V 0.1 V 1 V |
1.0 % + 3 |
| DC Voltage | 4.000 V
40.00 V 400.0 V 1000 V |
0.001 V
0.01 V 0.1 V 1 V |
0.5 % + 3 |
| AC Voltage(mV) | 400.0 mV | 0.1 mV | 3.0 % + 3 |
| DC Voltage(mV) | 400.0 mV | 0.1 mV | 1.0 % + 10 |
| Diode | 2.000 V | 0.001 V | 10% |
| Resistance | 400.0 Ω
4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ |
0.1 Ω
0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ |
0.5 % + 3
0.5 % + 2 0.5 % + 2 0.5 % + 2 0.5 % + 2 1.5% + 3 |
| Capacitance | 40.00 nF
400.0 nF 4.000 μF 40.00 μF 400.0 μF 1000 μF |
0.01 nF
0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF |
2 % + 5
2 % + 5 5 % + 5 5 % + 5 5 % + 5 5 % + 5 |
| Frequency | 50.00 Hz
500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz |
0.01 Hz
0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz |
0.1 % + 3 |
| Duty Cycle | 1 % to 99 % | 0.1% | |
| AC Current
uA (40-400Hz) |
400.0 μA
4000 μA |
0.1 μA 1 μA |
1.5 % + 3 |
| AC Current
mA(40-400Hz) |
40.00 mA
400.0 mA |
0.01 mA
0.1 mA |
1.5 % + 3 |
| AC Current
A(40-400Hz) |
4.000 A
10.00 A |
0.001 A
0.01 A |
1.5 % + 3 |
| DC Current (uA) | 400.0 μA
4000 μA |
0.1 μA
1 μA |
1.5 % + 3 |
| DC Current (mA) | 40.00 mA
400.0 mA |
0.01 mA
0.1 mA |
1.5 % + 3 |
| DC Current (A) | 4.000 A
10.00 A |
0.001 A
0.01 A |
1.5 % + 3 |
LED Test and On-off Threshold:
| Feature | Lighting Range | measuring range | Resolution | Accuracy |
| LED VF Test(LED Test Socket) | 1.00-6.00V | N/A | N/A | N/A |
| LED VF Test(Test Lead) | 1.00-6.00V | 1.00-6.00V | 0.01V | 10% |
| On-off threshold | N/A | N/A | N/A | 70Ω |
Input Parameter:
| Feature | Overload Protect | Input Impedance | Common Mode Rejection Ratio | Conventional mode rejection ratio |
| AC Voltage | 1000V | >10MΩ,<100pF | DC,Frequency Between 50Hz to 60Hz, >60dB | N/A |
| AC Voltage(mV) | 400mV | >1MΩ,<100pF | Frequency Between 50Hz to 60Hz,>80dB | N/A |
| DC Voltage | 1000V | >10MΩ,<100pF | DC,Frequency Between 50Hz to 60Hz,>100dB | Frequency Between 50Hz to 60Hz,>60dB |
| DC Voltage(mV) | 400mV | >1MΩ,<100pF | Frequency Between 50Hz to 60Hz,>80dB | N/A |
Package Included:
Fluke 18B+*1
Test Lead*1
Manual *1
Battery(Not Included)
Brand
FLUKE
Based on 0 reviews
Be the first to review “Fluke 18B+ Digital Multimeter”
-
Digital Multi Meter
The Sanwa CD800a is a basic, portable, 4000 count digital multimeter
- 4000 counts
- 0.7% Best Accuracy
- Sharp contrast LCD with character 17.5mm high is used
- Solid & protective body cover that can also be used as a tilt stand
- Frequency, capacitance, and duty cycle measurement function
- Continuity test with buzzer
Includes meter, instruction manual and test leads.
SKU: n/a -
Laser Distance Meters
LM40 Laser Distance Meter
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, multiple angle HD display5. Physical and electronics leveler6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more7. Auto power off after 3 minutes without operationSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
TITAN Clamp Multimeter TN88A in Pakistan
Specifications:
- TITAN TN88A Digital Clamp Meter 500V Insulation Tester
- DC voltage: 1000V ± (0.8% + 2)
- AC voltage: 750V ± (1.2% + 4)
- Alternating current: 200A / 1000A ± (2.5% + 5)
- Resistance: 200Ω / 20kΩ ± (1.0% + 2)
- Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
- High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
- The continuity of the alarm
- Low screen voltage
- Data retention
- Input impedance: 10MΩ
- Sampling rate: 3 times / s
- Maximum display: 1999
- Jaw opening: 50mm
SKU: n/a
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a -
Multimeters
UT890C+ TRMS Digital Multimeter
1.6000 Counts; Measure voltage and current RMS.
2.The capacitance slot has REL function. Range is from 1pF to 99.99mF
3.The device can measure frequency of high accuracy. The min resolution is 0.001Hz4.It has special functions: MAX/MIN and MAX-MIN
5.The min DC and AC resolution is 0.01μA and 1μA. The max range is 20A.
6.It can measure diode whose voltage drop is up to 3V .So it is very suitable to measure LED.
7.It has functions: hold, power off and backlight.
8.It also measure temperature ℃ and ℉SKU: n/a -
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a
There are no reviews yet.