-6%

UNI-T UTG4162A Function/Arbitrary Waveform Generator


bandwidth 160MHz
Channels 2
Sampling rate 500MS/s
Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary
Working modes Output on/off, continuous, modulation, sweep, burst
Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM
Frequency Characteristics
Sine 1μHz~160MHz
Square/Pulse 1μHz~50MHz
Slope 1μHz~4MHz
Harmonic 1μHz~80MHz
Noise (-3dB) 160MHz bandwidth
Resolution 1μHz
Arbitrary Waveform
Frequency range 1μHz~40MHz
Length 8~32Mpts
Vertical resolution 16 bits
Min rise/fall time (typical: 1Vpp) <5ns
General Characteristics
Power 100V~240V ACrms, 50Hz/60Hz
Display 8-inch TFT LCD, WVGA (800 x 480)
Product color White and grey
Product net weight 3.5kg
Product size 336mm x 164mm x 108mm
Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord
Standard individual packing Carton box
Standard quantity per carton 1pcs
Standard carton measurement 405mm x 225mm x 265mmv

360,000 384,820

Compare

UNI-T UTG4162A Function/Arbitrary Waveform Generator

:    
  • Type: Function/arbitrary waveform generator
  • Brand: UNI-T
  • Bandwidth: 160MHz
  • Sampling rate: 500MS/s
  • Square/Pulse: 1μHz~50MHz
  • Harmonic: 1μHz~80MHz
  • Resolution: 1μHz
  • Model Number: UTG4162A
  • Channels: 2
  • Sine: 1μHz~160MHz
  • Slope: 1μHz~4MHz
  • Noise (-3dB): 160MHz bandwidth
  • Frequency range: 1μHz~40MHz

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UNI-T UTG4162A Function/Arbitrary Waveform Generator”

There are no reviews yet.

  • LM200C Laser Distance Meters (Discontinued)

    0 out of 5
    (0)

    Features of LM80C/LM120C/LM200C Laser Distance Meters

    ● 2.4-inch color screen

    ● 12 measurement modes
    ● Electronic leveling
    ● 3 selectable measurement references
    ● USB 3.0 supply power
    ● 100 groups of data storage
    ● Rotatable screen
    ● Camera-aided measurement
    ● 2m drop test
    ● IP65 dust and water proof
    SKU: n/a
  • UT620 Series Digital Micro Ohm Meters

    0 out of 5
    (0)

    UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.

    SKU: UN62B0TUOM
  • YIHUA 946D-III Lcd Touch Screen Glass Separator Machine

    0 out of 5
    (0)
    Input voltage:110V/220V/230V/240V Optional Product weight:4kg/pc
    Size:38*21*17cm
    SKU: n/a
  • MIC-2501,2500V Insulation Resistance Meter

    0 out of 5
    (0)

     

    Electrical safety:

    • type of insulation: double, in acc. with EN 61010-1 und IEC 61557
    • measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
    • case protection rating in acc. with EN 60529: IP65

    Other technical specifications:

    • power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
    • weight of the meter: approx. 0,9 kg
    • dimensions: 200 x 180 x 77 mm
    • display: LCD segment display
    • measurement results memory: 990 cells, 11880 records,
    • transmission of measurement results: USB
    SKU: n/a
  • UDP1306C Industrial Linear DC Power Supply

    0 out of 5
    (0)

    Features of UDP1306C Industrial Linear DC Power Supply:

    • 4-digit high precision display
    • OVP OCP OTP protection
    • Output setting viewable
    • Remote control (output ON/OFF)
    • Shutdown memory/keypad lock
    • Intelligent cooling fan
    • USB charging interface
    • RS232 program-controlled communication
    • USB device communication
    • 5 sets of data storage
    SKU: n/a