Insulation Resistance Testers UT513A
10 in stock
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
₨81,000 ₨87,518
10 in stock
CompareUT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
| Weight | 2 kg |
|---|---|
| Dimensions | 20 × 15 × 9 cm |
| Specifications | Range | Accuracy | |
| Model | UT513A | ||
| Insulation Resistance (Ω) | Test Voltage | 500V/1000V/2500V/5000V | 0%～20% |
| 500V | 0.5MΩ~20GΩ | ±(3%+5) | |
| 1000V | 1.0MΩ~40GΩ | ±(3%+5) | |
| 2500V | 2.5MΩ~100GΩ | ±(3%+5) | |
| 5000V | 5.0MΩ~1000GΩ | ±(3%+5) | |
| Short Circuit Current | >3.0mA | ||
| DC Voltage (V) | 600V | ±(2%+3) | |
| AC Voltage (V) | 600V | ±(2%+3) | |
| Features | |||
| Auto Range | √ | ||
| Auto Power Off | √ | ||
| Secondary Display | √ | ||
| Low Battery Indication | √ | ||
| Data Storage | 18 | ||
| Comparison | √ | ||
| DAR | √ | ||
| PI | √ | ||
| USB Interface | √ | ||
| LCD Backlight | √ | ||
| Analogue Bar Graph | 30 | ||
| Overload Indication | √ | ||
| High Voltage Indication | √ | ||
| Timer | Around 15 Minutes | √ | |
| General Characteristics | |||
| Power | 1.5V Batteries (LR14) x 8 | ||
| LCD Size | 123mm x 58mm | ||
| Product Color | Red and Grey | ||
| Product Weight | UT511-1.2Kg, UT512-1.8Kg, UT513A-2Kg | ||
| Product Size | 202mm×155mm×94mm | ||
| Standard Accessories | 2 PCs of one plug test lead to one alligator clip (Black and Green), 1 piece of two plugs test lead to one alligator clip (Red), Batteries, USB Cable, PC Software CD, Power Adapter | ||
| Standard Individual Packing | Gift Box, Tool Box, User Manual, Warranty Card | ||
| Standard Quantity Per Carton | 4pcs | ||
| Standard Carton Measurement | 525mm x 335mm x 345mm | ||
| Standard Carton Gross Weight | 19kg | ||
| Optional Accessories | Power Adapter | ||
Brand
UNI T
Based on 0 reviews
Be the first to review “Insulation Resistance Testers UT513A”
-
Leeb Hardness Tester
UT347A Leeb Hardness Tester
Features of UT347A Leeb Hardness Tester
Certificates: CE (In processing), UKCA
● 6 kinds of hardness values (HL, HB, HRC, HRB, HV, HS) is a real-time measurement
● One hardness tester can be equipped with 7 different impact devices● Automatic identification without calibration when replacing impact device
● Statistical, multi-unit, line chart, histogram 4 measurement modes
● Camera: 640×480 pixels (900 BMP format pictures could be stored)● Automatic alarm when the upper and lower limits are exceeded● Adjustable backlight brightness● Mobile phone Bluetooth APP and PC software analysis data● Support thermal printing● Tri-color LED indication and LED flashlightSKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Related products
-
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a -
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a
There are no reviews yet.