-
×
UT 659D LED Tester
- Vendor:
Subtotal: ₨9,000
-28%
LED Tester
UT659A LED testers
Features of UT659 Series LED testers
● Detect backlight without disassembly
● Intelligent adjustment of voltage and current
● Test value shown on LCD
₨7,800 ₨10,900
UT659A LED testers
UT659 series products are widely used in LED single lamp bead test (UT659D), inspection and repair of LCD TV backlight, strip light and modulator tube, etc. UT659A/UT659D LED tester supports full voltage (85V~265V, 50Hz/60Hz) input, which can be used after 1 minute of power-up to ensure stable voltage output. When performing a LED test at 30mA/300V, the LED polarity can be automatically identified, and the output voltage is adaptively adjusted according to the forward voltage drop of the tested LED.
Brand
UNI T
Based on 0 reviews
Be the first to review “UT659A LED testers”
-
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a -
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Wire & Cable Testers
UT681C Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a
Related products
-
LED Tester
UT 659D LED Tester
Specifications Range UT659D Certifications CE/RoHS Output voltage 24V √ 300V √ Output current 2mA √ 30mA √ Continuity Output voltage: 5V (DC) Measuring resistance: 0~99.9Ω Input range 85V to 265V @ 50/60Hz Backlight function constant on Safety protection High-impedance open circuit Operating temperature 0°C~40°C Storage temperature -10°C~50°C Relative humidity <80% RH Operating altitude ≤2000m Drop protection 1m Category ratings CAT II 300V General Characterisitics Power AC 85V~260V， 50Hz/60Hz Display 60mm x 35mm Product net weight 175g Product size 150mm x 56mm x 42mm Standard accessories Power cable, test leads, English manual Standard individual packing Gift box, blister Standard quantity per carton 20pcs Standard carton measurement 345mm x 335mm x 245mm Standard carton gross weight 7.7kg SKU: n/a
There are no reviews yet.